Coventry · England

Bath chip & crack repair in Whitmore Park, Coventry

Our repair technicians come to Whitmore Park for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Chips on the rim or sides
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Whitmore Park

Bath repair at your home in Whitmore Park

Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Common call-outs are for a hole punched through by something heavy and hairline or through cracks in acrylic, in whirlpool & spa baths, cast iron enamel and roll-top & freestanding.

Every repair is covered by a one-year guarantee.

Location
Whitmore Park (CV6, CV7)
County
Coventry
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Aftercare tips

To keep it looking its best for years:

  • Put a towel in the bath if you’re working above it
  • Ensure an acrylic bath is firm underfoot
  • Give the bath a quick rinse after use
  • Keep abrasive pads and gritty cleaners away from the bath

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.

How we price bath repair

Repairs from £95. A fixed quote means you know the cost before you book. We take into account:

  • How much damage there is
  • The material
  • Whether we combine several jobs
  • What kind of damage it is

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

How to get a fixed quote

Before you send pictures, a few simple things make all the difference:

  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • Any details about the material

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Whitmore Park questions

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

How much does bath repair cost in Whitmore Park?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

What we’re called out for in Whitmore Park

A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.

Typical reasons for a call-out include:

  • Chips along the edge of the bath
  • A kit repair that didn’t last
  • Scuffs and scratches in the surface
  • Rusty patches near the plughole

Before booking anyone

  • How changes to the job are handled
  • Whether the price is fixed and includes VAT
  • What preparation is included
  • Who will actually do the work

Our hiring checklist

Our work in Whitmore Park

Whitmore Park is about 2 miles north-west of Coventry, in Coventry. We travel to clients in Whitmore Park and the surrounding area, so nothing has to leave your home. Whitmore Park is one of 88 towns and villages in Coventry where we work. We work right across the region, from Whitmore Park to Birmingham (about 16 miles away).

We cover every part of CV6 and CV7. That includes homes on Lowe Road, Moxon Road and High Street. We also cover the places around Whitmore Park: Holbrooks (1 mile east), Keresley (1 mile south-west), Brownshill Green (1 mile west), Neal's Green (1 mile north-east) and Daimler Green (1 mile south). Within a short drive, we also cover Ernesford Grange (4 miles south-east), Cheylesmore (3 miles south), Ball Hill (3 miles south-east), Earlsdon (3 miles south), Binley (4 miles south-east) and Spon End (3 miles south).

Around Whitmore Park

Around Whitmore Park, we work in homes near Whitmore Park Primary School, Cardinal Newman Catholic School and Community College and The Pilot Public House, among other places. Also close by are St Luke's Church (0.5 miles east) and Exhall Grange School (1.2 miles north-east). Whitmore Park’s nearest station is Coventry Arena station, about 1.3 miles east of the centre. A little further out are Coventry Transport Museum (2.2 miles south) and Coventry and Warwickshire Hospital (2 miles south).

Map of Whitmore Park © OpenStreetMap contributors

How the visit works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Ensure the area is dry
  • Let us know which floor the room is on
  • Move bottles, mats and clutter away from the area

How to get a price

Send us photos of the damage and a wider shot of the entire item, with your CV6 postcode, and we’ll come back with a fixed quote.

Send pictures for a quote

Read more

What we cannot put right

In fairness, some problems need a different fix:

  • Metal that has corroded all the way through
  • A bath that moves underfoot, until its support is fixed
  • Leaks from the waste or overflow fittings (a plumber’s job)

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel

Should you replace it?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Whitmore Park clients choose us

  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • Normally one visit, start to finish
  • Technicians who travel to you, UK-wide

Read our prices page and bath cost comparison.

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.