Coventry · England

Non-slip bath & shower coating in Whitmore Park, Coventry

Non-slip bath coating for Whitmore Park, without a refit. Send us photos for a fixed quote, then book a visit.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Whitmore Park

About our non-slip bath coating in Whitmore Park

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s resurfaced baths that are now too smooth and safety for older or less mobile people, we can typically put it right, on enamelled baths, acrylic baths and shower trays alike.

We guarantee the work for a year. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
Whitmore Park (CV6, CV7)
Area hub
Coventry
Guarantee
12 months on all our work
Quote
Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before you book.

Materials we work on in Whitmore Park

  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths

FAQs for Whitmore Park

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Can you quote from pictures?

Generally, yes. A close-up and a wider photo are enough to give a fixed price.

Can pets and children be at home?

Keep pets and children away from the work area on the day.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you work in Whitmore Park?

Yes. We cover the entire UK and come to Whitmore Park and the rest of Coventry. Send us photos for a fixed quote, or call 0345 017 0787.

What does non-slip bath coating cost?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item with your CV6 postcode.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

When to call us in Whitmore Park

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Most people get in touch when they notice something like this:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • A fixed price, and whether VAT is included
  • Whether the colour is mixed to match
  • What prep work is covered
  • How to look after the finish

Our hiring checklist

What affects the price in Whitmore Park

We price every job individually, from your photos. What matters most is:

  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach
  • What the surface is made of
  • The size and number of damaged areas

Our prices are the same across the UK, with no extra for Whitmore Park. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

Most quotes are done from photos alone. To help us price it:

  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • A wider photo showing the entire bath or shower tray
  • Natural light rather than flash

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.

The process

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a morning or an afternoon. Before we go, we’ll explain when it can be used and how to look after it.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

How to prepare

  • Mention any parking restrictions or tricky access
  • Ensure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

Ask for a price

The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Send pictures for a quote

Read more

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • No need to remove anything
  • Most jobs done in one visit
  • CHAS and Constructionline accredited
  • A fixed quote before booking

Read our prices page.

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Our work in Whitmore Park

Whitmore Park is about 2 miles north-west of Coventry, in Coventry. Anywhere in CV6, we come to you. Whitmore Park is one of 88 towns and villages in Coventry where we work. Our nearest city page is Birmingham, about 16 miles away.

We cover every part of the CV6 and CV7 postcode area and the streets around it. We regularly work on streets such as Lowe Road, Moxon Road and High Street and the roads around them. Neighbouring places we cover include Holbrooks (1 mile east), Keresley (1 mile south-west), Brownshill Green (1 mile west), Neal's Green (1 mile north-east) and Daimler Green (1 mile south). We also work in nearby towns such as Ernesford Grange (4 miles south-east), Cheylesmore (3 miles south), Ball Hill (3 miles south-east), Earlsdon (3 miles south), Binley (4 miles south-east) and Spon End (3 miles south).

Local landmarks in Whitmore Park

Locally, our jobs take us to homes close to Whitmore Park Primary School, Cardinal Newman Catholic School and Community College and The Pilot Public House, among other places. Other local landmarks include St Luke's Church (0.5 miles east) and Exhall Grange School (1.2 miles north-east). The nearest railway station is Coventry Arena station, about 1.3 miles east. A little further out are Coventry Transport Museum (2.2 miles south) and Coventry and Warwickshire Hospital (2 miles south).

Map of Whitmore Park © OpenStreetMap contributors

Landlord and trade work in Whitmore Park

Housing associations and facilities teams use us for planned and reactive repairs in Coventry and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.