East Riding of Yorkshire · England
Bath chip & crack repair in Wilberfoss, East Riding of Yorkshire
Bath repair in Wilberfoss without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Chips caused by builders
- An old repair that has yellowed or come loose
Bath repair at your home in Wilberfoss
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for deep scratches in acrylic and impact holes in acrylic, across cast iron enamel, acrylic and whirlpool & spa baths.
A one-year guarantee comes as standard.
- Area
- Wilberfoss (YO41)
- Region
- East Riding of Yorkshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Once the work has cured, treat it gently:
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Places near Wilberfoss
What else we do in Wilberfoss
About Wilberfoss
Wilberfoss is about 5 miles west of Pocklington, in East Riding of Yorkshire. Our repair technicians come to clients in Wilberfoss and the surrounding area, so there’s no workshop to go to. We work in all 299 towns and villages across East Riding of Yorkshire. Our nearest city page is Leeds, about 29 miles away.
Every address in YO41 is within our area. From Main Street, Ings Road and Middle Street or a nearby road, we can come to you. Nearby, we also work in Fangfoss (3 miles north-east), Bolton (3 miles east), Full Sutton (3 miles north), Gowthorpe (3 miles north-east) and Barmby Moor (3 miles south-east). Larger places within reach include Pocklington (5 miles east), Market Weighton (11 miles south-east), Howden (14 miles south), Stamford Bridge (3 miles north), Gilberdyke (15 miles south-east) and Holme upon Spalding Moor (9 miles south-east).
Landmarks near Wilberfoss
Our customers here include homes close to Church of St John the Baptist and the streets around them. Other landmarks nearby include Buttercrambe Castle (4.6 miles north).
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so these are the limits:
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Questions from Wilberfoss
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you repair a crack in an acrylic bath?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
What affects the price in Wilberfoss
Repairs from £95. You will know the full cost before booking. We take into account:
- Whether we combine several jobs
- The size and number of damaged areas
- The type of damage
- The material and finish
Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- The material, if you know it
- A photo taken from further back
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
When to call us in Wilberfoss
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Common reasons people in Wilberfoss contact us include:
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
- A chip where the taps sit
- An old repair that has yellowed or come loose
Before booking anyone
- Whether the price covers travel
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
- What aftercare is recommended
Landlords, agents and businesses in Wilberfoss
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Wilberfoss as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the next day.
Getting ready for the visit
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
