East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Wilberfoss, East Riding of Yorkshire
Bath re-enamelling in Wilberfoss without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Wilberfoss and the surrounding area
Wilberfoss is about 5 miles west of Pocklington, in East Riding of Yorkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover 299 places in East Riding of Yorkshire. Our jobs stretch from Wilberfoss to Leeds (29 miles away).
Postcode districts we cover here: YO41. Jobs here include addresses on Main Street, Ings Road and Middle Street. If you are just outside Wilberfoss, we cover Fangfoss (3 miles north-east), Bolton (3 miles east), Full Sutton (3 miles north), Gowthorpe (3 miles north-east) and Barmby Moor (3 miles south-east). Further out, we also cover Pocklington (5 miles east), Market Weighton (11 miles south-east), Howden (14 miles south), Stamford Bridge (3 miles north), Gilberdyke (15 miles south-east) and Holme upon Spalding Moor (9 miles south-east).
Local landmarks in Wilberfoss
We visit homes around Church of St John the Baptist. Other landmarks nearby include Buttercrambe Castle (4.6 miles north).
How we handle bath re-enamelling in Wilberfoss
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s lots of chips and rust spots and an old resurfacing that’s failing, we can generally put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Wilberfoss (YO41)
- Region
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Wilberfoss
More services for Wilberfoss
What a repair cannot fix
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Do you need bath re-enamelling in Wilberfoss?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
You may need us if you’ve spotted:
- Wear marks under the taps
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
Before booking anyone
- How long it needs to cure
- What the guarantee covers, and for how long
- What aftercare is recommended
- Whether there are any call-out or travel charges
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
If you manage property in Wilberfoss, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- The material and finish
- The size and number of damaged areas
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
You can normally get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- The material, if you know it
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Straight answers about what a repair can do
- No need to remove anything
- Rooms protected and left tidy
- Same prices wherever you are
Take a look at our prices page or resurfacing vs replacement cost guide.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes most of the day. The room is left tidy and you’ll know when it can be used.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the following day.
Preparing for the visit
- Ensure the area is dry
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Your questions about bath re-enamelling in Wilberfoss
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Wilberfoss.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What areas do you cover?
We work UK-wide, and that includes Wilberfoss. Prices do not change with location.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
