Staffordshire · England
Bath chip & crack repair in Wilnecote, Staffordshire
We travel to Wilnecote for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- A chip where the taps sit

Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Bath repair at your home in Wilnecote
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Typical jobs include scuffs and scratches in the surface and a kit repair that didn’t last, on pressed steel enamel, roll-top & freestanding and acrylic.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.

- Where
- Wilnecote (B77)
- Area hub
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Wilnecote
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Most people contact us after spotting one of these:
- Deep scratches in acrylic
- A chip where the taps sit
- Holes from dropped items
- Rust by the waste and overflow
Questions to ask before booking
- Whether the price covers travel
- How long it needs to cure
- What aftercare is recommended
- How your room will be protected
More services for Wilnecote
What bath repair costs
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- The colour and finish to match
- Previous DIY repairs that have to come out
- What kind of damage it is
- Doing more than one item at once
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- The postcode, so we can plan the visit
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It typically takes a few hours, depending on the damage, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Related advice
Our work in Wilnecote
Wilnecote is about 2 miles south of Tamworth, in Staffordshire. Whether you are in the middle of Wilnecote or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Wilnecote is one of 512 places in Staffordshire we cover. Our jobs stretch from Wilnecote to Birmingham (about 13 miles away).
Our repair technicians cover all of B77 and the streets around it. From Leven Road, Arden Road and Lagoon Road or anywhere nearby, a technician can come to you. We also travel to Belgrave (1 mile north), Stonydelph (1 mile north-east), Glascote (1 mile north), Bolehall (1 mile north-west) and Tamworth (2 miles north). Within a short drive, we also cover Burton upon Trent (14 miles north), Lichfield (8 miles north-west), Rugeley (15 miles north-west), Burntwood (12 miles north-west), Horninglow (15 miles north) and Stowe (9 miles north-west).
Around Wilnecote
Around Wilnecote, we work in homes near The Wilnecote School, Queen's Head Inn Public House and Tamworth Enterprise College, among other places. You will also find Wilnecote Junior School (within half a mile south-east) and Church of Holy Trinity (less than half a mile north). The closest station to Wilnecote is Wilnecote station, roughly 0.5 miles west. A little further out are Tamworth Castle (2.1 miles north-west) and The Bryans Museum (1.9 miles west). Not far away are Middleton Lakes RSPB reserve.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common questions in Wilnecote
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
What areas do you cover?
The whole UK, including all of Staffordshire. Just include your postcode and we’ll confirm dates.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Are there extra charges for Wilnecote?
There’s no separate call-out charge. Your fixed quote includes everything.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
What a repair cannot fix
It helps to know what we can’t do:
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Wilnecote
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
How to care for the repair
Simple care helps the repair last. Our advice:
- Store metal items away from the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Send the address, photos and access details.
About our accreditations · Every repair comes with a one-year guarantee.

