Powys · Wales
Bath Repair in Winllan
Problem with your bath in Winllan? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
Landlords, agents and businesses in Winllan
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our bath repair in Winllan
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. Common call-outs are for a hole punched through by something heavy and scuffs and scratches in the surface, across whirlpool & spa baths, roll-top & freestanding and pressed steel enamel.
A one-year guarantee comes as standard.
- Location
- Winllan (SY22)
- Area hub
- Powys
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Rinse the bath after use, especially in hard water areas
- Make sure an acrylic bath is firm underfoot
- Put a towel in the bath if you’re working above it
- A dripping tap stains enamel, so fix it early
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Rooms protected and left tidy
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
- Usually one visit, start to finish
See our prices page and resurfacing vs replacement cost guide.
How the visit works
Arrival times are agreed in advance. Once we are there, the work takes a few hours, depending on the damage in most cases. We leave the room clean.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Read more
Covering Winllan
Winllan is about 7 miles south-west of Oswestry, in Powys. Clients in Winllan get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Winllan is one of 234 places in Powys where we work. Our jobs stretch from Winllan to Liverpool (about 44 miles away).
Every address in SY22 is covered. If you are just outside Winllan, we cover Llansantffraid-ym-Mechain (1 mile south), Llansantffraid (1 mile south), Waen (2 miles south-east), Tre-Derwen (2 miles south-east) and Llanfechain (2 miles south-west). We also work in nearby towns such as Y Trallwng (9 miles south), Bron-y-Buckley (9 miles south), Cegidfa (6 miles south), Llanfair Caereinion (12 miles south-west), Four Crosses (4 miles south-east) and Llanfyllin (5 miles west).
Landmarks near Winllan
Locally, our jobs take us to homes close to St Ffraid's Church, Llansantffraid C.I.W.A. School and Sun Hotel. Further afield, we also cover the area around Winllan Enclosure (less than half a mile west). Not far away are Llyn Moelfre and Winllan Hill.
What we’re called out for in Winllan
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
Signs it’s time to call us include:
- Chips caused by builders
- A kit repair that didn’t last
- Rust spots around the plughole
- Scuffs and scratches in the surface
Before booking anyone
- What happens if the damage is worse than the pictures show
- Whether they match the colour on site
- Who turns up on the day
- What protection goes down before work starts
FAQs for Winllan
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you cover Winllan?
Yes, we do. We send a technician to Winllan for every job, and the price is the same as everywhere else.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
How do I get a price for bath repair in Winllan?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Places near Winllan
What else we do in Winllan
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
