Norfolk · England
Bath Repair for Wolterton homes
Problem with your bath in Wolterton? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rust spots around the plughole
When we would advise against a repair
A repair is not right for every job, including:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we’ll say what we think.
What we work on
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Bath repair at your home in Wolterton
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. Our technicians work on acrylic, cast iron enamel and whirlpool & spa baths, and people most frequently call us about rusty patches near the plughole and an old repair that has yellowed or come loose.
Big or small, it’s backed by a one-year guarantee in Wolterton and across Norfolk.
- Area
- Wolterton (NR11)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Wolterton
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- Holes from dropped items
- Damage beneath the taps
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
Before booking anyone
- How your room will be protected
- What happens if the damage is worse than the photos show
- When it can be used again
- How long the guarantee is and what it covers
Wolterton and nearby
Wolterton is about 7 miles west of North Walsham, in Norfolk. Whether you are in the middle of Wolterton or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 797 towns and villages in Norfolk, from the larger towns to small villages.
Our technicians cover all of NR11. Close by, we cover Wickmere (1 mile north), Calthorpe (1 mile east), Erpingham (2 miles east), Lower Street (2 miles north) and Aldborough (2 miles north-east). Within a short drive, we also cover Norwich (14 miles south), Sprowston (13 miles south), Thorpe St Andrew (15 miles south), North Walsham (7 miles east), Sheringham (7 miles north) and Norwich Lanes (15 miles south).
Landmarks near Wolterton
In Wolterton, that means homes near Saracen's Head pub and Church of St Margaret. Further afield, we also cover the area around Norfolk Museum of Straw Works (3.3 miles east) and Bessingham Moat Yard (3.4 miles north).
FAQs for Wolterton
What areas do you cover?
We cover the entire UK, including Wolterton and the rest of Norfolk. Send your postcode with your photos and we’ll confirm dates.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Are there extra charges for Wolterton?
We don’t add a call-out fee. Your fixed quote includes everything.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Also near Wolterton
What else we do in Wolterton
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- How much damage there is
- Any earlier repairs that need removing first
- The colour and finish to match
- The material and finish
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Photographing the damage takes a minute. Please include:
- Something in shot to show the size
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- The material, if you know it
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Repair or replace in Wolterton?
People often assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- We come to you, anywhere in the UK
- No need to remove anything
Read our prices page or resurfacing vs replacement cost guide.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Have new chips seen to early
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It generally takes a morning or an afternoon, and you can get on with other things while we are there.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
Ask for a price
Most customers in Wolterton get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
