Oxfordshire · England

Bath Repair in Wolvercote

Our technicians come to Wolvercote for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Impact holes in acrylic
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Wolvercote

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

About our bath repair in Wolvercote

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on acrylic, whirlpool & spa baths and roll-top & freestanding, and people most frequently call us about holes from dropped items and cracks in an acrylic bath.

Whatever the size of the job, you get the same one-year guarantee in Wolvercote and across Oxfordshire.

Before and after: a chipped, rust-stained bath around the plughole
Where
Wolvercote (OX2)
Area hub
Oxfordshire
Cover
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Wolvercote questions

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

How much does bath repair cost in Wolvercote?

Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Do the materials smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Is the work guaranteed?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

When we’d advise against a repair

A repair isn’t right for every job, including:

  • A bath that moves underfoot, until its support is fixed
  • Cracks in acrylic we cannot reach from underneath
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Wolvercote

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

What affects the price in Wolvercote

Prices start from £95. There’s no charge for travel to Wolvercote. The price comes down to:

  • Any earlier repairs that need removing first
  • The size and number of damaged areas
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send pictures for a quote

Two or three clear photos are typically enough. It helps if you send:

  • Natural light rather than flash
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • The material, if you know it

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your pictures, we will talk to you before going ahead.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can typically use the bath the following day.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can
  • Make sure the room can be ventilated

How to get a price

To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Advice

Do you need bath repair in Wolvercote?

Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

If you can see any of these, send us a picture:

  • Chips caused by builders
  • A kit repair that didn’t last
  • Chips on the rim or sides
  • Holes from dropped items

What your quote should include

  • How long it needs to cure
  • What aftercare is recommended
  • A fixed price, and whether VAT is included
  • What the guarantee covers, and for how long

Choosing a repair company

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

Should you replace it?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • Every repair guaranteed for a year
  • CHAS, Constructionline and SafeContractor accredited
  • Work done at your home or business
  • We leave the room as we found it

Read our prices page or guide to resurfacing and replacement costs.

Covering Wolvercote

Wolvercote is about 3 miles north-west of Oxford, in Oxfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Wolvercote is one of 443 places in Oxfordshire where we work. Our jobs stretch from Wolvercote to Birmingham (about 54 miles away).

Jobs in OX2 are booked in the same way as anywhere else. From Home Close, Godstow Road and Baynhams Drive or anywhere nearby, we can come to you. If you are just outside Wolvercote, we cover Godstow (1 mile south-west), Binsey (1 mile south), Sunnymead (1 mile east), Cutteslowe (1 mile east) and Summertown (1 mile east). We also work in nearby towns such as Oxford (3 miles south-east), Didcot (12 miles south), Bicester (10 miles north-east), Abingdon-on-Thames (7 miles south), Witney (9 miles west) and Carterton (13 miles west).

What’s near Wolvercote

In Wolvercote, that means homes near Church of St Peter, The White Hart Public House and St Hugh's College Main Building Including Library and the streets around them. Also close by are Wolvercote Primary School (0.5 miles east), St Edward's School (1.1 miles south-east) and Oxford Academy (1.5 miles south-east). For rail, the closest station is Oxford Parkway station, roughly 1.5 miles north-east of the centre. Further afield, we also cover the area around Oxford Castle (2.6 miles south-east) and Acland Hospital (2.1 miles south-east). Green spaces nearby include Hook Meadow and The Trap Grounds and Harcourt Hill.

Map of Wolvercote © OpenStreetMap contributors

Landlords, agents and businesses in Wolvercote

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.