Sheffield · England
Bath chip & crack repair in Woodside, Sheffield
Bath repair in Woodside without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
About our bath repair in Woodside
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We’re often asked to fix a failed DIY repair that’s discoloured or lifting and cracks in an acrylic bath, across pressed steel enamel, roll-top & freestanding and acrylic.
You get a one-year guarantee, the same in Woodside as everywhere else we work.
- Area
- Woodside (S3, S4, S6)
- Area hub
- Sheffield
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Woodside?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Every repair guaranteed for a year
- No extra charge for your area
- Fixed prices from your pictures
- Colour-matched on site
Read our prices page and guide to resurfacing and replacement costs.
Also in Woodside
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Aftercare tips
Simple care helps the repair last. We recommend:
- Don’t scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
- Get a dripping tap fixed promptly
- Stick to mild cleaners and a soft cloth
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
About Woodside
Woodside is about 2 miles north of Sheffield, in Sheffield. Whether you are in the middle of Woodside or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Woodside is one of 118 towns and villages in Sheffield we cover. You can also see our page for Leeds, about 29 miles away.
Here we cover the S3, S4 and S6 postcode area. Jobs here include addresses on Roe Lane, Green Lane and Minna Road and the roads around them. Nearby, we also work in Neepsend (1 mile south-west), Burngreave (1 mile south-east), Upperthorpe (1 mile south-west), Netherthorpe (1 mile south-west) and Cathedral Quarter (1 mile south). Within a short drive, we also cover Chapeltown (5 miles north), Hackenthorpe (5 miles south-east), Brincliffe (3 miles south-west), Heeley (3 miles south), Woodthorpe (3 miles south-east) and Woodseats (4 miles south).
Landmarks near Woodside
We visit homes around Pye Bank CofE Primary School, Christ Church and Sheffield Central Technical School. Nearby too are Sheffield Cathedral (0.9 miles south), Fir Vale School (1.2 miles north-east), Western Bank Library (1.2 miles south-west) and Abbeyfield Park (under half a mile north-east). The nearest railway station is Sheffield station, about 1.3 miles south of the centre. Other landmarks nearby include Central (1.5 miles south) and Sheffield Royal Hospital (0.7 miles south-west). Not far away are Greno Woods.
- Nearby, you’ll find The Fat Cat pub (0.5 miles south)
Landlords, agents and businesses in Woodside
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- What kind of damage it is
- What the surface is made of
- How many items we do on one visit
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- What it’s made of, if you know
- Natural light rather than flash
- One picture of the whole bath
- A clear, close picture of the problem area
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we’ll tell you honestly.
Materials we work on in Woodside
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
- Keep a parking space free if you can
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Common questions in Woodside
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How long before I can use the bath?
Typically the next day. We will tell you the exact curing time when we finish.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
About our accreditations · Every repair comes with a one-year guarantee.
