Coventry · England
Bath chip & crack repair in Wootton Green, Coventry
Bath repair in and around Wootton Green: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- A cracked acrylic bath
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Bath repair at your home in Wootton Green
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We are often asked to fix a kit repair that didn’t last and damage done while the bathroom was being fitted, on pressed steel enamel, acrylic and whirlpool & spa baths.
All our work comes with our one-year guarantee, wherever you are in Coventry.
- Location
- Wootton Green (CV7)
- County
- Coventry
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Wootton Green
Wootton Green is about 6 miles north-west of Kenilworth, in Coventry. From the centre of Wootton Green to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Wootton Green is one of 88 towns and villages in Coventry we cover. Our nearest city page is Birmingham, about 11 miles away.
We cover every part of the CV7 postcode area and the streets around it. Streets in the area include Wootton Lane and Wootton Green Lane. We also cover the places around Wootton Green: Bradnock's Marsh (1 mile north-west), Berkswell (1 mile north-east), Barston (2 miles west), Four Oaks (2 miles north-east) and Benton Green (2 miles east). We also work in nearby towns such as Coventry (7 miles east), Hillfields (7 miles east), Bishopsgate Green (7 miles east), Radford (6 miles east), Ernesford Grange (9 miles east) and Foleshill (8 miles east).
Around Wootton Green
Around Wootton Green, we work in homes near Heart of England School, Church of Saint John the Baptist and Berkswell Church of England Voluntary Aided Primary School, among other places. Wootton Green’s nearest station is Berkswell station, about 1 mile south-east of the centre. Well-known places in the area include Bickenhill Castle Hills Farm (4.1 miles north-west) and Berkswell Village Museum (0.9 miles east).
Do you need bath repair in Wootton Green?
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a photo:
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
Questions to ask before you book
- How the room is protected while they work
- What happens if they find more damage
- Who will actually do the work
- Whether there are any call-out or travel charges
Towns and villages near Wootton Green
Also in Wootton Green
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
- Free fixed quotes from pictures
- No extra charge for your area
See our prices page or guide to resurfacing and replacement costs.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, and we finish by cleaning up and talking you through the result.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Read more
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Wootton Green questions
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Wootton Green
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
