Solihull · England
Bath chip & crack repair in Bradnock's Marsh, Solihull
Bath repair for Bradnock's Marsh, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Rooms protected and left tidy
- No need to remove anything
- CHAS and Constructionline accredited
- Work done at your home or business
Read our full price list and guide to resurfacing and replacement costs.
About our bath repair in Bradnock's Marsh
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. Whether it’s chips along the edge of the bath and scuffs and scratches in the surface, we can normally put it right.
All our work is covered by a one-year guarantee.
- Area
- Bradnock's Marsh (B92)
- Region
- Solihull
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
How to look after the repair
So the finish stays in good condition:
- Check that an acrylic bath doesn’t move when you stand in it
- Protect the bath with a towel when doing jobs nearby
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It usually takes a morning or an afternoon, and you can get on with other things while we’re there.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Have a window or extractor fan available
Ask for a price
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What bath repair costs
Repairs from £95. You’ll know the full cost before you book. We look at:
- The material and finish
- Unusual colours or finishes
- Access to the area
- Any earlier repairs that need removing first
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
When to call us in Bradnock's Marsh
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people contact us after spotting something like this:
- Snagging damage from a refit
- Rust by the waste and overflow
- Deep scratches in acrylic
- A failed DIY repair that’s discoloured or lifting
Comparing quotes
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
- How soon you can use it again
- The length of the guarantee and what it covers
Covering Bradnock's Marsh
Bradnock's Marsh is about 5 miles east of Solihull, in Solihull. We visit homes and businesses in Bradnock's Marsh, so nothing has to leave your home. Bradnock's Marsh is one of 33 places in Solihull we cover. Our nearest city page is Birmingham, about 10 miles away.
Here we cover the B92 postcode area. That includes homes on Kenilworth Road and Bradnock's Marsh Lane and the roads around them. Neighbouring places we cover include Wootton Green (1 mile south-east), Berkswell (1 mile east), Barston (1 mile south-west), Four Oaks (2 miles north-east) and Hampton in Arden (2 miles north-west). Larger places within reach include Solihull (5 miles west), Monkspath (5 miles west), Knowle (3 miles south-west), Elmdon Heath (4 miles west), Bentley Heath (4 miles south-west) and Dorridge (5 miles south-west).
Near you in Bradnock's Marsh
Locally, our jobs take us to homes close to Heart of England School, Berkswell Church of England Voluntary Aided Primary School and Church of Saint John the Baptist. For rail, the closest station is Berkswell station, about 1.5 miles south-east of the centre. Further afield, we also cover the area around Catherine-de-Barnes Isolation Hospital (2.9 miles west) and Berkswell Village Museum (1.2 miles east).
Also near Bradnock's Marsh
More services for Bradnock's Marsh
Questions from Bradnock's Marsh
Do you come to Bradnock's Marsh?
Yes. We cover the whole UK and travel to Bradnock's Marsh and the rest of Solihull. Send photos and we’ll quote, or call 0345 017 0787.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Which areas do you work in?
All of Solihull, and the rest of the UK. Travel is included in the price.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
About our accreditations · Every repair comes with a one-year guarantee.
