North Lincolnshire · England
Bath Repair for Wrawby homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Wrawby. Send pictures for a free, fixed quote.
- Repairs from £95
- A chip where the taps sit
- Rust by the waste and overflow
Our work in Wrawby
Wrawby is about 8 miles east of Scunthorpe, in North Lincolnshire. Customers in Wrawby get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We cover 90 places across North Lincolnshire. We work right across the region, from Wrawby to Leeds (about 48 miles away).
We work across DN20. Whether you live on Little Lane, Vicarage Road and Frankland Close or a nearby road, a technician can come to you. Other places close to Wrawby include Brigg (1 mile south-west), Elsham (2 miles north-east), Barnetby le Wold (2 miles east), Bigby (3 miles south-east) and Howsham (3 miles south-east). Within a short drive, we also cover Scunthorpe (8 miles west), Barton-upon-Humber (8 miles north), Bottesford (9 miles west), Frodingham (8 miles west), Crosby (8 miles west) and Broughton (4 miles west).
Landmarks near Wrawby
Locally, our jobs take us to homes close to The Vale Academy, Church of Saint Mary and Wrawby St Mary's CofE Primary School. Wrawby’s nearest station is Brigg station, roughly 1.5 miles south-west. Well-known places in the area include Broughton Castlethorpe (2.1 miles west) and Glanford (2.8 miles north-west).
Bath repair at your home in Wrawby
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We regularly repair whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and common reasons people get in touch are deep scratches in acrylic and rusty patches near the plughole.
Every repair comes with a one-year guarantee, wherever you are in North Lincolnshire.
- Where
- Wrawby (DN20)
- Region
- North Lincolnshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Wrawby: your questions answered
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
When can I have a bath again?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
What affects the price in Wrawby
Repairs from £95. We don’t charge extra for travel to Wrawby. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Access to the area
- Unusual colours or finishes
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- Natural light rather than flash
- Details of any past repairs
- The postcode, so we can plan the visit
Email us photos of the damage and one of the entire item, with your DN20 postcode, and we will reply with a fixed price.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
Getting a price
To get a price, send a couple of pictures using our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in North Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Nearby places to Wrawby
Also in Wrawby
What we can’t put right
It helps to know what we can’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- A dripping tap stains enamel, so fix it early
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Common problems we fix in Wrawby
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
These are the problems we’re asked about most:
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
- Snagging damage from a refit
- Rust by the waste and overflow
Questions to ask before booking
- What happens if they find more damage
- Who will actually do the work
- A fixed price, and whether VAT is included
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
