Oxfordshire · England
Bath Repair for Wroxton homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Wroxton and across Oxfordshire. Free, fixed quotes from your photos.
- Repairs from £95
- Rust spots around the plughole
- Snagging damage from a refit
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Bath repair at your home in Wroxton
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. Our repair technicians work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are scratches you can feel with a fingernail and chips along the edge of the bath.
Big or small, it’s backed by a one-year guarantee in Wroxton and across Oxfordshire.
- Location
- Wroxton (OX15)
- Area hub
- Oxfordshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Wroxton
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Typical reasons for a call-out include:
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- A chipped rim or side
- Damage beneath the taps
Comparing quotes
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- How the room is protected while they work
- What the guarantee covers, and for how long
Honest limits
Before you book, it’s worth knowing the limits too:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Wroxton
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Wroxton: your questions answered
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Will I be able to see the repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Which areas do you work in?
All of Oxfordshire, and the rest of the UK. Travel is included in the price.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you work in Wroxton?
Yes. We work across the UK and come to Wroxton and the rest of Oxfordshire. Send pictures and we will quote, or call 0345 017 0787.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
What else we do in Wroxton
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
What affects the price in Wroxton
Repairs from £95. You will know the full cost before you book. We take into account:
- Any earlier repairs that need removing first
- How many items we do on one visit
- The colour and finish to match
- The material
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- A wider photo showing the whole bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Colour-matched on site
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
Take a look at our prices page or resurfacing vs replacement cost guide.
Wroxton and the surrounding area
Wroxton is about 2 miles west of Banbury, in Oxfordshire. Our repair technicians come to clients in Wroxton and the surrounding area, so nothing has to leave your home. Wroxton is one of 443 places in Oxfordshire we cover. You can also see our page for Birmingham, about 35 miles away.
Our visits in OX15 work the same way as everywhere else we cover. Jobs here include addresses on Main Street, Dark Lane and Mills Lane. If you’re just outside Wroxton, we cover Drayton (1 mile east), North Newington (1 mile south), Horley (1 mile north), Neithrop (2 miles south-east) and Ruscote (2 miles south-east). Within a short drive, we also cover Bure Park (15 miles south-east), Chipping Norton (11 miles south-west), Grimsbury (3 miles east), Bloxham (4 miles south), Bodicote (4 miles south-east) and Charlbury (14 miles south).
Near you in Wroxton
Locally, our jobs take us to homes close to White Horse Public House, Wroxton Church of England Primary School and Drayton School. You’ll also find Church of All Saints (under half a mile east) and North Oxfordshire Academy (1.3 miles east). For rail, the closest station is Banbury station, roughly 3.1 miles east. Further afield, we also cover the area around W. O. Bentley Memorial Foundation (0.8 miles north-west) and Hanwell Castle (1.8 miles north-east). For a walk, there’s Crouch Hill.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Housing associations and facilities teams use us for planned and reactive repairs in Oxfordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
