Oxfordshire · England
Bath chip & crack repair in Ruscote, Oxfordshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Ruscote. Send pictures for a free, fixed quote.
- Repairs from £95
- A chipped rim or side
- Snagging damage from a refit

Bath repair in Ruscote, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the day after. There is no need to book a plumber or tiler, because nothing is disconnected. Our repair technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people contact us are a kit repair that didn’t last and hairline or through cracks in acrylic.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.

- Where
- Ruscote (OX16, OX15)
- County
- Oxfordshire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition for years:
- Do not scrub with anything abrasive
- Get a dripping tap fixed promptly
- Rinse it down after each bath
- Ensure an acrylic bath is firm underfoot
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we cannot get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Repairing versus replacing in Ruscote
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why Ruscote clients choose us
- A fixed quote before you book
- No extra charge for your area
- We will tell you if it’s not worth repairing
- We leave the room as we found it
See our prices page or guide to resurfacing and replacement costs.
What else we do in Ruscote
When to call us in Ruscote
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
The most common problems we are called about are:
- A cracked acrylic bath
- Holes from dropped items
- Deep scratches in acrylic
- A chip where the taps sit
What your quote should include
- When it can be used again
- What the guarantee covers, and for how long
- How changes to the job are handled
- Whether there are any call-out or travel charges
Ruscote: your questions answered
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
The process
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Ask for a price
For a price in Ruscote, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Ruscote and nearby
Ruscote is about 1 mile west of Banbury, in Oxfordshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We cover 443 places across Oxfordshire. You can also see our page for Birmingham, about 36 miles away.
Our visits in OX16 and OX15 work the same way as everywhere else we cover. Local streets include Abbey Road, Lunnun Road and Bailey Road. Nearby, we also work in Neithrop (1 mile north), Banbury (1 mile east), Drayton (1 mile north-west), North Newington (1 mile west) and Broughton (2 miles south-west). Further out, we also cover Bicester (14 miles south-east), Bure Park (14 miles south-east), Chipping Norton (11 miles south-west), Woodstock (15 miles south), Bloxham (3 miles south) and Charlbury (14 miles south).
Local landmarks in Ruscote
Locally, our jobs take us to homes close to St Joseph's Catholic Primary School, Admiral Holland pub and Drayton School, among other places. Nearby too are People's Park (0.9 miles east), St Paul's Church Centre (less than half a mile north) and North Oxfordshire Academy (0.8 miles north). For rail, the closest station is Banbury station, about 1.5 miles east. Nearby you will also find W. O. Bentley Memorial Foundation (2.4 miles north-west) and Castle Quay Shopping Centre (1.2 miles east). Open spaces near Ruscote include Farthinghoe Nature Reserve and Crouch Hill.
Landlord and trade work in Ruscote
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.

