Bradford · England
Bath chip & crack repair in Wyke, Bradford
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Wyke. Free, fixed quotes from your pictures.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Damage done while the bathroom was being fitted
When to call us in Wyke
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- Scratches you can feel with a fingernail
- A chipped rim or side
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
What to look for in a quote
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
- Aftercare advice
Bath repair at your home in Wyke
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. If you’re dealing with snagging damage from a refit and rusty patches near the plughole, we can help.
All of our repairs are guaranteed for twelve months in Wyke and everywhere else. We return to put right any problem with the work.
- Area
- Wyke (BD12, HX3, HD6)
- County
- Bradford
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Store metal items away from the bath
- Put a towel in the bath if you are working above it
- Do not leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Landlord and trade work in Wyke
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
More services for Wyke
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
The process
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. It normally takes a few hours, and we’ll tell you if anything changes.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Let us know about parking or access
Get a quote
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
Questions from Wyke
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Why repair rather than replace?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Our prices are the same across the UK, with no extra for Wyke. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- Colour-matched on site
- We come to you, anywhere in the UK
- One visit for most repairs
- We leave the room as we found it
Read our full price list or bath cost comparison.
Covering Wyke
Wyke is about 2 miles north of Brighouse, in Bradford. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Wyke is one of 140 places in Bradford where we work. Our jobs stretch from Wyke to Leeds (about 10 miles away).
All of BD12, HX3 and HD6 is covered, from the main roads to the quietest streets. You will find streets such as Wyke Lane, Clare Road and Green Lane. You’ll find Wyke on the A58, which makes it straightforward to reach. We also cover the places around Wyke: Wyke Common (1 mile north-east), Lower Wyke (1 mile south), Norwood Green (1 mile west), Scholes (1 mile south-east) and Low Moor (1 mile north). Within a short drive, we also cover Bradford (4 miles north), Keighley (11 miles north-west), Bingley (8 miles north), Shipley (7 miles north), Baildon (8 miles north) and Great Horton (3 miles north).
What’s near Wyke
Our customers here include homes close to Lightcliffe Academy, Church of St Mary the Virgin and Wyke Lion pub. For rail, the closest station is Low Moor station, roughly 1.2 miles north-east of the centre. A little further out are Transperience (1.5 miles north-east) and Halifax Rural District (2.4 miles south-west).
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
