Shropshire · England
Bath Repair in Wyson
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Wyson. Free, fixed quotes from your pictures.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A chipped rim or side
Common problems we fix in Wyson
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Signs it’s time to call us include:
- Cracks in an acrylic bath
- Rust by the waste and overflow
- Chips on the rim or sides
- Damage beneath the taps
What your quote should include
- Whether the price is fixed and includes VAT
- Aftercare advice
- Whether there are any call-out or travel charges
- How soon you can use it again
How we handle bath repair in Wyson
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are damage done while the bathroom was being fitted and rust spots around the plughole.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Wyson (SY8)
- County
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
The process
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a few hours. Before leaving, we tell you how long to leave it and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the day after.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Ask for a price
Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Wyson, and we will reply with a fixed quote.
Related advice
Repair or replace in Wyson?
Replacing a fitted bath typically means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why us?
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
- One-year guarantee on every repair
See our prices page or bath cost comparison.
Where we work around Wyson
Wyson is about 17 miles north of Hereford, in Shropshire. Jobs in Wyson are booked in like any other job: a fixed price from your photos, then a visit to do the work. Wyson is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Wyson to Birmingham (about 36 miles away).
Jobs in SY8 work the same way as everywhere else we cover. Local streets include Wyson Avenue, Wyson Lane and The Coppice. We also travel to Woofferton (1 mile north-west), Comberton (2 miles west), Orleton (2 miles west), Mitnell (2 miles north-west) and Ashford Bowdler (2 miles north). We also work in nearby towns such as Ludlow (4 miles north), Craven Arms (11 miles north-west), Cleobury Mortimer (11 miles north-east), East Hamlet (4 miles north) and Halford (11 miles north-west).
Near you in Wyson
Around Wyson, we work in homes near Church of St Michael and Salwey Arms Public House Including Po Box. For rail, the closest station is Ludlow station, roughly 4.4 miles north. Well-known places in the area include Ludlow Community Hospital (4.5 miles north) and Little Hereford Manor (2 miles east). For a walk, there is Dionscourt Hill.
Work for landlords and builders
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Landlords, letting agents and housing providers in Wyson use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Towns and villages near Wyson
What else we do in Wyson
What we can’t put right
To be straight with you, some problems need a different fix:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Questions from Wyson
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
When can I have a bath again?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What bath repair costs
Repairs from £95. There’s no area surcharge for Wyson. The price reflects:
- How many areas need work
- Doing more than one item at once
- Any earlier repairs that need removing first
- The colour and finish to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Any details about the material
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
