Isle of Wight · England
Bath chip & crack repair in Yaverland, Isle of Wight
Bath repair across Yaverland and nearby, usually in one visit.
- Repairs from £95
- Rust spots around the plughole
- A failed DIY repair that’s discoloured or lifting
Landlord and trade work in Yaverland
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Yaverland as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
How we handle bath repair in Yaverland
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Typical jobs include impact holes in acrylic and a cracked acrylic bath, on acrylic, pressed steel enamel and cast iron enamel.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Area
- Yaverland (PO36)
- Region
- Isle of Wight
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why choose Surface Doctor in Yaverland
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
- Most jobs done in one visit
- Honest advice, even when it means no job
See our prices page or bath cost comparison.
Common problems we fix in Yaverland
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- Cracks in an acrylic bath
- A hole punched through by something heavy
- Rust by the waste and overflow
- Chips caused by builders
Questions to ask before you book
- When it can be used again
- If travel is included in the price
- Who turns up on the day
- Whether the price is fixed and includes VAT
Honest limits
We’ll always be straight with you, so here’s what a repair will not do:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we will tell you honestly.
What we work on
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- The size and number of damaged areas
- The material
- Doing more than one item at once
- The type of damage
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- What it’s made of, if you know
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
About Yaverland
Yaverland is about 4 miles south of Ryde, in Isle of Wight. From the centre of Yaverland to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Yaverland is one of 125 places in Isle of Wight where we work. Our nearest city page is London, about 73 miles away.
Jobs in PO36 work the same way as everywhere else we cover. That includes homes on Meadow Way, Yaverland Close and Yaverland Road. Nearby, we also work in Yarbridge (1 mile north-west), Morton (1 mile north-west), Brading (1 mile north), Sandown (1 mile south-west) and Adgestone (1 mile north-west). Within a short drive, we also cover Newport (8 miles west), Ryde (4 miles north), Cowes (10 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (9 miles north-west). For island and remote addresses, ring us first and we’ll plan the trip.
What’s near Yaverland
In Yaverland, that means homes near The Caulkheads pub, The Bay Church of England School and Sandown Bay Academy and the streets around them. The closest station to Yaverland is Brading station, about 1 mile north of the centre. Well-known places in the area include Sandown Castle (0.7 miles south-west) and Arthur Webster Memorial Hospital for Children (2.8 miles south-west). Green spaces nearby include Bembridge Down and Brading Marshes RSPB reserve.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Protect the bath with a towel when doing jobs nearby
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
More services for Yaverland
What we do, step by step
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. It normally takes a few hours, and we’ll keep you posted as we go.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
Getting a price
Send us a photo of the damage and one of the entire item, and tell us you are in Yaverland, and we will reply with a fixed quote.
Advice
FAQs for Yaverland
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What areas do you cover?
All of Isle of Wight, and the rest of the UK. There’s no extra charge for travel.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
How long does the repair take to cure?
Generally within a day, depending on the repair.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
