Kent · England

Bath Repair in Yelsted

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Yelsted, with a one-year guarantee on every repair.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Yelsted

Signs you need bath repair in Yelsted

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Look out for these signs:

  • Damage beneath the taps
  • Snagging damage from a refit
  • Impact holes in acrylic
  • Hairline or through cracks in acrylic

Comparing quotes

  • What protection goes down before work starts
  • What aftercare is recommended
  • The length of the guarantee and what it covers
  • Whether there are any call-out or travel charges

Our hiring checklist

Bath repair in Yelsted, done in place

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for cracks in an acrylic bath and scratches you can feel with a fingernail, on pressed steel enamel, acrylic and cast iron enamel.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Location
Yelsted (ME9)
Region
Kent
Cover
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Repairs by material

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

What a repair can’t fix

A repair is not right for every job, for example:

  • Wear across the whole surface, which needs re-enamelling
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths

Landlords, agents and businesses in Yelsted

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

For anyone letting property in or around Yelsted, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Repairing versus replacing in Yelsted

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Why us?

  • No extra charge for your area
  • Every repair guaranteed for a year
  • We come to you, anywhere in the UK
  • Straight answers about what a repair can do

See our full price list and guide to resurfacing and replacement costs.

Questions from Yelsted

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Can you repair a crack in an acrylic bath?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

How much does bath repair cost in Yelsted?

Repairs from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.

What do you need from me?

Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.

Can you repair a hole in a bath?

Generally. Photos of the hole and the underside help us check.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

How to care for the repair

Simple care helps the repair last. Our advice:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Cover the bath during DIY or decorating
  • Avoid scourers, wire wool and gritty cream cleaners
  • Have new chips seen to early

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

Yelsted and the surrounding area

Yelsted is about 3 miles south-east of Gillingham, in Kent. Anywhere in ME9, a technician comes to you. Our repair technicians cover 922 places in Kent, from the larger towns to small villages. We work right across the region, from Yelsted to London (33 miles away).

All of ME9 is within our area, from the main roads to the quietest streets. That includes homes on Yelsted Road and Yelsted Lane and the roads around them. Nearby, we also work in Stockbury (1 mile east), Meresborough (1 mile north), Hartlip (1 mile north-east), Lower Hartlip (2 miles north-east) and Rainham (2 miles north). Within a short drive, we also cover Maidstone (6 miles south-west), Sittingbourne (5 miles east), Gravesend (12 miles north-west), Faversham (12 miles east), Northfleet (14 miles north-west) and Minster (10 miles north-east).

Local landmarks in Yelsted

Around Yelsted, we work in homes near Stockbury Hill Wood, St Augustine of Canterbury Catholic Primary School and Leigh Academy Rainham. The closest station to Yelsted is Rainham (Kent) station, roughly 2.5 miles north of the centre. A little further out are KIMS hospital (4 miles south-west). For a walk, there’s Detling Hill.

Map of Yelsted © OpenStreetMap contributors

What happens on the day

Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Keep pets and children out of the room while we work
  • Open a window if you can

Getting a price

To get a price, send two or three pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.