Devon · England
Bath chip & crack repair in Yelverton, Devon
We travel to Yelverton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Impact holes in acrylic
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
- Make sure an acrylic bath is firm underfoot
- Put a towel in the bath if you’re working above it
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
About our bath repair in Yelverton
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We are often asked to fix rust by the waste and overflow and chips under the taps, on cast iron enamel, acrylic and whirlpool & spa baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Yelverton (PL20)
- Area hub
- Devon
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow two to three hours for most chips, and we will tell you if anything changes.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Make sure the area is dry
- Mention any parking restrictions or tricky access
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
How we price bath repair
Prices start from £95. We price every job individually. The main factors are:
- How much damage there is
- Unusual colours or finishes
- How easy the damage is to reach
- What kind of damage it is
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
You can normally get a fixed price without us visiting. To make it quick:
- Any details about the material
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- Details of any past repairs
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Questions from Yelverton
Which areas do you work in?
All of Devon, and the rest of the UK. Travel is included in the price.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you cover Yelverton?
We do. We send a technician to Yelverton for every job, and the price is the same as everywhere else.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
How much does bath repair cost in Yelverton?
Prices start from £95. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your PL20 postcode.
Also in Yelverton
Yelverton and nearby
Yelverton is about 5 miles south-east of Tavistock, in Devon. Anywhere in PL20, we carry out the work at your property. We cover all 586 towns and villages across Devon, from the larger towns to small villages.
Here we cover the PL20 postcode area. From Ottor Road, Dousland Road and Westella Road or anywhere nearby, a technician can come to you. If you’re just outside Yelverton, we cover Axtown (1 mile south-west), Meavy (1 mile east), Bickleigh (4 miles south), Wotter (4 miles south-east) and Lee Moor (5 miles south-east). Within a short drive, we also cover Tavistock (5 miles north-west), Ivybridge (10 miles south-east), Ashburton (15 miles east), Buckfastleigh (13 miles east), South Brent (12 miles south-east) and Yealmpton (11 miles south).
Landmarks near Yelverton
Typical jobs here are in homes near Church of St Paul, Horrabridge Primary & Nursery School and Rock Inn, among other places. Nearby you will also find Tavistock Hospital (4.8 miles north-west) and Yelverton Paperweight Centre (less than half a mile west). Open spaces near Yelverton include Sheeps Tor and Crazywell Pool.
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. We charge the same wherever you are, with no extra for Yelverton. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
Read our full price list or bath cost comparison.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
