Conwy · Wales
Bath Repair in Ysbyty Ifan
Fixed-price bath repair in Ysbyty Ifan and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A chip where the taps sit
- Snagging damage from a refit
Prices and what affects them
Repairs from £95. There is no charge for travel to Ysbyty Ifan. The price comes down to:
- How many areas need work
- Any earlier repairs that need removing first
- The type of damage
- How easy the damage is to reach
The price reflects the work involved, not your postcode. You’ll see the full price before you book.
How to get a fixed quote
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- A clear, close picture of the problem area
For a price in Ysbyty Ifan, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Bath repair at your home in Ysbyty Ifan
A typical bath repair is a few hours’ work, and you can typically bathe again the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include scratches you can feel with a fingernail and hairline or through cracks in acrylic, across whirlpool & spa baths, pressed steel enamel and cast iron enamel.
Every job is backed for twelve months in Ysbyty Ifan and everywhere else. We return to put right any problem with the work.
- Where
- Ysbyty Ifan (LL24)
- County
- Conwy
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Ysbyty Ifan
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Most people contact us after spotting one of these:
- A chipped rim or side
- Snagging damage from a refit
- A cracked acrylic bath
- Impact holes in acrylic
What your quote should include
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
- Aftercare advice
- How long the guarantee is and what it covers
Repair or replace: which is better?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Ysbyty Ifan. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- A year’s guarantee on all work
- Most jobs done in one visit
- One price list for the whole UK
- Accredited with CHAS, Constructionline and SafeContractor
Read our pricing or resurfacing vs replacement cost guide.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Landlords, agents and businesses in Ysbyty Ifan
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. It normally takes a morning or an afternoon, and we’ll keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Let us know about parking or access
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
When we’d advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Towns and villages near Ysbyty Ifan
More services for Ysbyty Ifan
About Ysbyty Ifan
Ysbyty Ifan is about 19 miles south of Bae Colwyn, in Conwy. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We cover 75 places in Conwy, from the larger towns to small villages. Our jobs stretch from Ysbyty Ifan to Liverpool (42 miles away).
Postcode districts we cover here: LL24. Local streets include High Street, Ffordd Lôn Gefn and Church View, and we cover them all. If you’re just outside Ysbyty Ifan, we cover Pentrefoelas (3 miles north-east), Penmachno (3 miles west), Bro Machno (4 miles west), Betws-y-Coed (6 miles north-west) and Cerrigydrudion (7 miles east).
Around Ysbyty Ifan
We visit homes around Church of St. John. Nearby you’ll also find Maes Gwyn (2.6 miles north-east) and Tir Ifan (1.8 miles south). Green spaces nearby include Foel Gopyn and Llyn Hesgin.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Make sure an acrylic bath is firm underfoot
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Ysbyty Ifan questions
Do you come to Ysbyty Ifan?
We do. Repair technicians travel to Ysbyty Ifan from across the region, and the price is the same as everywhere else.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How long does the repair take to cure?
Typically within a day, though it depends on what we’ve done.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you repair a hole in a bath?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
About our accreditations · Every repair comes with a one-year guarantee.
