Conwy · Wales
Bath Repair in Bae Colwyn
Problem with your bath in Bae Colwyn? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Rusty patches near the plughole
- Chips on the rim or sides
How to care for the repair
Nothing complicated is needed:
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
- Get a dripping tap fixed promptly
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Bath repair in Bae Colwyn without replacing anything
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. We’re often asked to fix scratches you can feel with a fingernail and a chip where the taps sit, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.
Big or small, it’s backed by a one-year guarantee in Bae Colwyn and across Conwy.
- Where
- Bae Colwyn (LL29, LL28)
- Area hub
- Conwy
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Bae Colwyn
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
If you can see any of these, send us a picture:
- Hairline or through cracks in acrylic
- Holes from dropped items
- Chips on the rim or sides
- A kit repair that didn’t last
Before you book anyone
- How the colour is matched
- If travel is included in the price
- How the room is protected while they work
- How soon you can use it again
Repairing versus replacing in Bae Colwyn
People often assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Bae Colwyn customers choose us
- We will tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
- CHAS and Constructionline accredited
Take a look at our prices page or bath cost comparison.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
- Keep a parking space free if you can
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
About Bae Colwyn
Bae Colwyn (Welsh: Colwyn Bay) is about 29 miles west of Birkenhead, in Conwy. Across the LL29 area, a technician comes to you. We work in 75 places in Conwy, from the larger towns to small villages. Our nearest city page is Liverpool, about 34 miles away.
Our visits in LL29 and LL28 are booked in the same way as anywhere else. Whether you live on Station Road, Church Road and Woodland Park or a nearby road, we can come to you. Being close to the A55 and A547, Bae Colwyn is easy for our repair technicians to reach. We also cover the places around Bae Colwyn: Colwyn Bay (1 mile south), Old Colwyn (1 mile east), Colwyn Bay (1 mile east), Mochdre (1 mile west) and Bryn-y-maen (2 miles south-west). Further out, we also cover Llandudno (5 miles north-west), Abergele (6 miles east), Conwy (4 miles west), Cwlach (5 miles north-west), Deganwy (4 miles west) and Llandudno Junction (3 miles west). Bae Colwyn is one of the larger places we cover in Conwy.
Around Bae Colwyn
In Bae Colwyn, that means homes near St David's Welsh Church, The Royal pub and St Joseph's R.C. Primary School. There is a railway station in Bae Colwyn itself: Colwyn Bay station. Nearby you will also find Doll Museum & Model Railway (3.7 miles north-west) and Ednyfeds Castle (1.2 miles north-west). Green spaces nearby include Conwy RSPB reserve and Rhos on Sea Golf Course Lake.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
Send us photos and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Your questions about bath repair in Bae Colwyn
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
How we price bath repair
Prices start from £95. There’s no area surcharge for Bae Colwyn. The price reflects:
- The type of damage
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
Two or three clear photos are usually enough. Try to include:
- A coin beside the damage so we can judge size
- A picture taken from further back
- One sharp close-up of the damage
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Towns and villages near Bae Colwyn
Other services in Bae Colwyn
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
