Lincolnshire · England
Bath & shower resealing (mastic) in Addlethorpe, Lincolnshire
Bath, shower and sink resealing with new mould-resistant silicone at your home in Addlethorpe, with a one-year guarantee on every repair.
- Black mould in the sealant
- Sealant that is split or lifting
- Missing sealant behind the taps
Common problems we fix in Addlethorpe
Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.
Most people get in touch when they notice one of these:
- An untidy old seal
- Sealant that’s split or lifting
- Leaks at the edges
- Black mould in the sealant
Questions to ask before you book
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- How the colour is matched
- What the guarantee covers, and for how long
About our bath resealing in Addlethorpe
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why so many DIY reseals peel. We work on baths, wet rooms and shower trays & enclosures, and the jobs we see most are discoloured, yellow sealant and black mould in the sealant.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Addlethorpe (PE24)
- Area hub
- Lincolnshire
- Cover
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Addlethorpe
More services for Addlethorpe
Landlord and trade work in Addlethorpe
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a couple of hours. We leave the room clean.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Preparing for the visit
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Ensure the area is dry
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Advice
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Where we work around Addlethorpe
Addlethorpe is about 3 miles north of Skegness, in Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Addlethorpe is one of 732 towns and villages in Lincolnshire we cover.
Our technicians cover all of PE24. Whether you live on Old Church Road, St Nicholas Close and Church Lane or a nearby road, we can come to you. If you are just outside Addlethorpe, we cover Ingoldmells (1 mile east), Ashington End (2 miles south-west), Winthorpe (2 miles south), Skegness (3 miles south) and Seacroft (5 miles south). We also work in nearby towns such as Mablethorpe (10 miles north), Sutton on Sea (8 miles north), Spilsby (9 miles west), Alford (7 miles north-west), Burgh le Marsh (4 miles south-west) and Wainfleet All Saints (7 miles south-west).
Around Addlethorpe
In Addlethorpe, that means homes near Church of St Nicholas and Ingoldmells Academy and the streets around them. The closest station to Addlethorpe is Skegness station, about 3.7 miles south. Nearby you will also find Old Skegness Castle (4.5 miles south-east).
Common questions in Addlethorpe
Why does my sealant keep going mouldy?
Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How do I get a price for bath resealing in Addlethorpe?
Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Is resealing worth it?
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why us?
- One visit for most repairs
- A fixed quote before you book
- We come to you, anywhere in the UK
- No extra charge for your area
Read our pricing.
Aftercare tips
After the repair has cured, a few habits help it last:
- Replace the seal when mould sets in
- Wipe the joints dry after use
- Use the extractor fan
- Keep bottles off the joints
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Prices and what affects them
Prices are worked out job by job. What matters most is:
- How many areas need work
- Whether old repairs or coatings need taking off
- What kind of damage it is
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Details of any past repairs
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You will get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
