Gloucestershire · England
Bath & shower resealing (mastic) in Arlebrook, Gloucestershire
Our technicians come to Arlebrook for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Old sealant that looks dirty
- Mould you cannot clean out
- Silicone smeared on tiles
Work for landlords and builders
Landlords, letting agents and housing providers in Arlebrook use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
We regularly work with letting and managing agents. Send the address, photos and access details.
Bath resealing in Arlebrook, done in place
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, in a neat, continuous bead. If you’re dealing with stained silicone and damp near the bath, we can generally put it right, on wet rooms, shower trays & enclosures and baths alike.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Arlebrook (GL10)
- Region
- Gloucestershire
- Warranty
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Arlebrook
Do you cover the whole of Gloucestershire?
Everywhere in the UK, Arlebrook included. There is no extra charge for travel.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
My seal keeps tearing. Why?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
How long does a reseal take?
A bath or shower normally takes a couple of hours. It then needs time to cure.
Can you reseal over the old silicone?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How much does bath resealing cost in Arlebrook?
Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Hollow or loose tiles
- Gaps too big for silicone alone
- A bath or tray that moves, until its support is fixed
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
Do you need bath resealing in Arlebrook?
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
Keep an eye out for these signs:
- A messy previous reseal
- Gaps in the seal
- Mould you can’t clean out
- Leaks at the edges
What to look for in a quote
- How long it needs to cure
- Whether there are any call-out or travel charges
- How your room will be protected
- Whether cleaning and preparation are in the price
Resealing in Arlebrook: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- We leave the room as we found it
- CHAS and Constructionline accredited
- A fixed quote before you book
- Same prices wherever you are
Take a look at our prices page.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
What bath resealing costs
There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, with no extra for Arlebrook. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- A wider photo showing the entire bath or shower
To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Covering Arlebrook
Arlebrook is about 3 miles north-west of Stroud, in Gloucestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 470 places across Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 51 miles away.
Postcode districts we cover here: GL10. Other places close to Arlebrook include Stroud Green (1 mile south-west), Little Haresfield (1 mile north-west), Randwick (1 mile south-east), Westrip (1 mile south) and Stonehouse (1 mile south). Larger places within reach include Cheltenham (12 miles north-east), Gloucester (6 miles north), Stroud (3 miles south-east), St Paul's (12 miles north-east), Cirencester (14 miles east) and Lansdown (12 miles north-east).
Local landmarks in Arlebrook
Our clients here include homes close to Church of St Nicholas and Maidenhill School and the streets around them. The nearest railway station is Stonehouse station, about 1.7 miles south. Other landmarks nearby include Standish Hospital (0.9 miles south) and Haresfield Mount (1.5 miles north). The countryside around Arlebrook includes Frome Banks and Haresfield Beacon.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes around two hours, and you are welcome to carry on with your day while we work.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- We make sure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Getting ready for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, add your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Towns and villages near Arlebrook
Other services in Arlebrook
About our accreditations · Every repair comes with a one-year guarantee.
