West Dunbartonshire · Scotland
Bath Resealing in Arrochar
Bath, shower and sink resealing with new mould-resistant silicone at your home in Arrochar, with a one-year guarantee on every repair.
- Discoloured, yellow sealant
- Water getting behind the bath or tray
- Gaps in the seal

Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Bath resealing in Arrochar without replacing anything
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. Whether it’s old sealant that looks dirty and black mould in the sealant, we can typically put it right, on baths, shower trays & enclosures and basins & vanity units alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Location
- Arrochar (G83)
- Region
- West Dunbartonshire
- Guarantee
- A year, on every repair
- Price
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026

Landlords, agents and businesses in Arrochar
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Arrochar, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Air the room after use
- Give the seal a regular clean
- Reseal when black spots will not clean off
- Run the extractor fan during and after showers
Let it cure fully before using the bath or shower, normally about a day.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
About Arrochar
Arrochar (Gaelic: An t-Àrchar) is about 13 miles north of Helensburgh, in West Dunbartonshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Arrochar is one of 31 towns and villages in West Dunbartonshire we cover. Our jobs stretch from Arrochar to Glasgow (about 30 miles away).
Postcode districts we cover here: G83. Whether you live on Church Road, Beechwood and Macfarlane Drive or anywhere nearby, a technician can come to you. If you’re just outside Arrochar, we cover Succoth (1 mile north), Tarbet (1 mile north-east), An Tairbeart (2 miles north-east), Lochgoilhead (6 miles west) and Ardlui (7 miles north). We also work in nearby towns such as Alexandria (15 miles south-east), Balloch (15 miles south-east) and Jamestown (15 miles south-east).
Landmarks near Arrochar
Typical jobs here are in homes near Arrochar Church, among other places. The closest station to Arrochar is Arrochar & Tarbet station, about 1 mile north-east. Well-known places in the area include Inveruglas Isle Castle (3.9 miles north). Not far away are Loch Lomond.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Places near Arrochar
What else we do in Arrochar
How we price bath resealing
You will not pay by the hour. The price is based on:
- The type of damage
- Whether we combine several jobs
- How easy the damage is to reach
- Previous DIY repairs that have to come out
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from pictures
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- Details of any past repairs
- Natural light rather than flash
- A wider photo showing the whole bath or shower
- One sharp close-up of the damage
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Common problems we fix in Arrochar
Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.
Most people get in touch when they notice something like this:
- Mould you can’t clean out
- A messy previous reseal
- Sealant that’s split or lifting
- Stained silicone
Before booking anyone
- Who turns up on the day
- How changes to the job are handled
- A fixed price, and whether VAT is included
- If travel is included in the price
What we cannot put right
A repair is not right for every job, including:
- Loose tiles, which need refixing first
- Gaps too big for silicone alone
- A flexing bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Baths
FAQs for Arrochar
My seal keeps tearing. Why?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
How long does silicone take to cure?
You will get the curing time from us.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
How do I get a price for bath resealing in Arrochar?
We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item with your G83 postcode.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take about two hours for a bath.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
How to prepare
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
- Clear the area around the damage
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.

