Shropshire · England
Bath Resealing for Arscott homes
Bath resealing across Arscott and nearby, normally in one visit and guaranteed for a year.
- Black mould in the sealant
- Leaks at the edges
- Unsealed corners
Bath resealing in Arscott, done in place
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. Common call-outs are for leaks at the edges and a messy previous reseal, on baths, wet rooms and basins & vanity units.
All of our repairs are guaranteed for twelve months in Arscott and everywhere else. We return to put right any problem with the work.
- Area
- Arscott (SY5)
- County
- Shropshire
- Cover
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes around two hours, and you can get on with other things while we’re there.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
Email us a photo of the damage and a wider shot of the whole item, and tell us you’re in Arscott, and we’ll reply with a fixed price.
Advice
Covering Arscott
Arscott is about 5 miles south-west of Shrewsbury, in Shropshire. Across the SY5 area, we come to you. Arscott is one of 433 towns and villages in Shropshire where we work. You can also see our page for Birmingham, about 42 miles away.
Postcode districts we cover here: SY5. Other places close to Arscott include Cruckmeole (1 mile north), Hanwood (1 mile north), Longden (1 mile south-east), Plealey (1 mile south-west) and Cruckton (1 mile north). Larger places within reach include Shrewsbury (5 miles north-east), Coleham (4 miles north-east), Kingsland (4 miles north-east), Belle Vue (4 miles north-east), Monkmoor (6 miles north-east) and Bagley (5 miles north-east).
Landmarks near Arscott
Locally, our jobs take us to homes close to Mary Webb School and Science College, Church of St Anne and St Thomas and St Anne CofE Primary School, among other places. The closest station to Arscott is Shrewsbury station, roughly 4.7 miles north-east of the centre. Further afield, we also cover the area around The Parade Shopping Centre (3.3 miles north-east) and Stapleton Motte (3.1 miles south-east). For a walk, there is Bomere Pool.
Arscott questions
Do you come to Arscott?
Yes. We cover the whole UK and come to Arscott and the rest of Shropshire. Send pictures and we’ll quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Shropshire.
What happens next?
You’ll get a fixed quote back, generally with dates to choose from. There is no obligation to book.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
Why does the silicone keep cracking?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
Which areas do you work in?
We cover the entire UK, including Arscott and the rest of Shropshire. Send your postcode with your pictures and we’ll confirm dates.
Is resealing worth it?
Sealing over old silicone is a false economy. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- CHAS and Constructionline accredited
- Same prices wherever you are
- We leave the room as we found it
- Technicians who travel to you, UK-wide
Read our pricing.
Towns and villages near Arscott
Also in Arscott
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
How we price bath resealing
You will know the full cost before booking. We look at:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Access to the area
- What the surface is made of
Our prices are the same across the UK, with no extra for Arscott. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
When you take your pictures, a few simple things make all the difference:
- A wider photo showing the entire bath or shower
- Something in shot to show the size
- Your postcode, so we can check dates
- Any details about the material
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Work for landlords and builders
If you manage property in Arscott, we will quote for several properties at once. Just send photos for each address and we will price them together.
Landlords, letting agents and housing providers in Arscott use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Clean the joints with a mild cleaner
- Run the extractor fan during and after showers
- Replace the seal when mould sets in
- Wipe the joints dry after use
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
What we’re called out for in Arscott
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.
Clients usually contact us about:
- Water getting behind the bath or tray
- Gaps by the taps
- Gaps in the seal
- Old sealant that looks dirty
Questions to ask before you book
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- How changes to the job are handled
- How to care for the finish
About our accreditations · Every repair comes with a one-year guarantee.
