Shropshire · England
Bath re-enamelling & resurfacing in Arscott, Shropshire
Full bath re-enamelling and resurfacing for homes and businesses in Arscott and across Shropshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- A roll-top that’s seen better days
Aftercare tips
How the surface is treated afterwards matters:
- Do not use the bath until it has fully cured
- Get any chip repaired quickly
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Bath re-enamelling in Arscott without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, across Victorian roll-tops, acrylic baths and cast iron baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Arscott (SY5)
- County
- Shropshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Towns and villages near Arscott
More services for Arscott
What affects the price in Arscott
Prices start from £350. You won’t pay by the hour. The price is based on:
- How many areas need work
- Access to the area
- The material
- Doing more than one item at once
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Any details about the material
Send us pictures of the damage and a wider shot of the whole item, with your SY5 postcode, and we’ll come back with a fixed quote.
FAQs for Arscott
Are there extra charges for Arscott?
Travel is included in the price, with the same prices everywhere we work.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Do you cover Arscott?
Yes. We work across the UK and travel to Arscott. Send pictures and we’ll quote, or call 0345 017 0787.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
How to get a price
For a price in Arscott, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
When we’d advise against a repair
Some jobs aren’t right for a repair, for example:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Arscott
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Our work in Arscott
Arscott is about 5 miles south-west of Shrewsbury, in Shropshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Arscott is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 42 miles away.
All of SY5 is within our area. Nearby, we also work in Cruckmeole (1 mile north), Hanwood (1 mile north), Longden (1 mile south-east), Plealey (1 mile south-west) and Cruckton (1 mile north). Further out, we also cover Shrewsbury (5 miles north-east), Coleham (4 miles north-east), Kingsland (4 miles north-east), Belle Vue (4 miles north-east), Monkmoor (6 miles north-east) and Bagley (5 miles north-east).
Landmarks near Arscott
Locally, our jobs take us to homes close to Mary Webb School and Science College, Church of St Anne and St Thomas and St Anne CofE Primary School, among other places. For rail, the closest station is Shrewsbury station, roughly 4.7 miles north-east. Well-known places in the area include The Parade Shopping Centre (3.3 miles north-east) and Stapleton Motte (3.1 miles south-east). Green spaces nearby include Bomere Pool.
Common problems we fix in Arscott
Frequently the bath has just had decades of use. The body of the bath is normally perfectly sound.
Clients typically contact us about:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Questions to ask before booking
- Aftercare advice
- What happens if they find more damage
- How the colour is matched
- What prep work is covered
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Why us?
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
Take a look at our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
