Oxfordshire · England
Bath Resealing in Ashampstead
Bath resealing in and around Ashampstead: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Water getting behind the bath or tray
- A messy previous reseal
- Mould you can’t clean out
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- A flexing bath
- Loose tiles, which need refixing first
- Water damage behind the bath that needs a builder
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
About our bath resealing in Ashampstead
We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. If you’re dealing with water getting behind the bath or tray and gaps in the seal, we can generally put it right, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Ashampstead (RG8)
- Region
- Oxfordshire
- Guarantee
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Ashampstead
Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.
The things customers usually mention when they call include:
- Black mould in the sealant
- Discoloured, yellow sealant
- Gaps in the seal
- Damp near the bath
What to look for in a quote
- Aftercare advice
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Looking after it afterwards
Nothing complicated is needed:
- Let steam out after showers
- Do not stand toiletries on the seal
- Clean the sealant gently and regularly
- Keep the joints dry
Keep the room well ventilated, and wipe the joints after use to keep mould away.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes about two hours for a bath. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Prices and what affects them
Prices are worked out job by job, from your photos. The main factors are:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- Access to the area
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- A clear, close picture of the problem area
- What it’s made of, if you know
- A photo taken from further back
- Good light, ideally daylight, without flash glare
Most customers in Ashampstead get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Covering Ashampstead
Ashampstead is about 7 miles north-east of Thatcham, in Oxfordshire. Customers in Ashampstead get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 443 places in Oxfordshire. Our jobs stretch from Ashampstead to London (47 miles away).
Jobs in RG8 are booked in the same way as anywhere else. Whether you live on Chapel Lane, Noakes Hill and Church Lane or anywhere nearby, we can come to you. If you’re just outside Ashampstead, we cover Ashampstead Green (1 mile north), Stubbles (1 mile south-east), Burnt Hill (2 miles south), Upper Basildon (2 miles east) and New Town (3 miles east). Larger places within reach include Didcot (9 miles north), Abingdon-on-Thames (14 miles north), Wantage (12 miles north-west), Henley-on-Thames (12 miles east), Grove (13 miles north-west) and Benson (10 miles north).
Near you in Ashampstead
Around Ashampstead, we work in homes near Church of St Clement and the streets around them. The nearest railway station is Goring & Streatley station, about 3.2 miles north-east. Other landmarks nearby include Yattendon Castle (1.7 miles south-west). For a walk, there’s Hartslock.
Why it’s worth resealing in Ashampstead
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why Ashampstead clients choose us
- Nothing taken out or refitted
- Free fixed quotes from pictures
- No extra charge for your area
- Usually one visit, start to finish
Read our pricing.
FAQs for Ashampstead
How do I book?
Send pictures through the quote form or call 0345 017 0787.
What does bath resealing cost?
Because every job differs, we price from photos. You know the full cost before anything is booked.
How long does silicone take to cure?
You will get the curing time from us, generally around a day.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Ashampstead.
Which areas do you work in?
The whole UK, including all of Oxfordshire. Send your postcode with your pictures and we will confirm dates.
Nearby places to Ashampstead
More services for Ashampstead
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
