Buckinghamshire · England

Bath & shower resealing (mastic) in Ballinger Common, Buckinghamshire

Bath resealing for Ballinger Common, without a refit. Get a fixed price from your pictures, then book a visit.

  • Damp near the bath
  • Missing sealant behind the taps
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Ballinger Common?

Bath resealing in Ballinger Common, done in place

We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. If you’re dealing with leaks at the edges and a messy previous reseal, we can normally put it right, on wet rooms, shower trays & enclosures and baths alike.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Ballinger Common (HP16)
Area hub
Buckinghamshire
Guarantee
A year, on every repair
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

Your questions about bath resealing in Ballinger Common

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Do you seal over the old sealant?

We always remove the old sealant completely. Fresh silicone doesn’t stick to old.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders across Buckinghamshire.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Why reseal now?

Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why Ballinger Common clients choose us

  • We leave the room as we found it
  • Everything repaired in place
  • A year’s guarantee on all work
  • Fixed prices from your pictures

Take a look at our pricing.

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Open a window after bathing
  • Clean the sealant gently and regularly
  • Wipe the joints dry after use
  • Keep bottles off the joints

Avoid scraping the joints, and keep shampoo bottles off the joints.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

What happens on the day

Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take about two hours for a bath, and we leave the room as we found it.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access
  • Point us to the nearest place to park

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Get a fixed quote

Related advice

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

About Ballinger Common

Ballinger Common is about 3 miles west of Chesham, in Buckinghamshire. Wherever you are in the HP16 postcode area, we carry out the work at your property. Ballinger Common is one of 263 places in Buckinghamshire we cover. Our nearest city page is London, about 29 miles away.

Our repair technicians cover all of the HP16 postcode area and the streets around it. Streets in the area include Chiltern Road, Village Road and Sly Corner, all of which we cover. Close by, we cover Lee Common (1 mile north-west), South Heath (1 mile south), Hyde End (1 mile south-east), Swan Bottom (1 mile north-west) and Chartridge (1 mile east). Larger places within reach include Aylesbury (9 miles north-west), High Wycombe (7 miles south-west), Chesham (3 miles east), Marlow (11 miles south), Amersham (5 miles south-east) and Beaconsfield (8 miles south).

Local landmarks in Ballinger Common

Around Ballinger Common, we work in homes near The Pheasant pub, Lee Common Church of England School and The Misbourne School and the streets around them. For rail, the closest station is Great Missenden station, about 1.7 miles south-west. Well-known places in the area include Chiltern Hospital (2.2 miles south) and Roald Dahl Museum and Story Centre (1.7 miles south-west). For a walk, there is Sands Bank and Pavis Wood.

Map of Ballinger Common © OpenStreetMap contributors

When to call us in Ballinger Common

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.

The most common problems we’re called about are:

  • An untidy old seal
  • Missing sealant behind the taps
  • Gaps in the seal
  • Stained silicone

Before you book anyone

  • What preparation is included
  • A fixed quote, and whether VAT is included
  • When it can be used again
  • Who will actually do the work

Our hiring checklist

What bath resealing costs

There are no hourly rates or hidden extras. The price is based on:

  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • Unusual colours or finishes
  • How easy the damage is to reach

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your pictures

We price nearly every job from pictures. This is what to send:

  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size
  • The material, if you know it
  • A photo taken from further back

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

What we can’t put right

Some jobs are not right for a repair, including:

  • Water damage behind the bath that needs a builder
  • A flexing bath
  • Very wide gaps that need a trim

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.