Buckinghamshire · England

Bath and surface repairs in HP16

Live in HP16? Our technicians cover Prestwood, Great Missenden and Little Kingshill and every street in between, with everything repaired at your home.

Surface repairs across HP16

About bath repair in HP16

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Typical jobs include scuffs and scratches in the surface and rust by the waste and overflow, on acrylic, roll-top & freestanding and whirlpool & spa baths.

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow two to three hours for most chips, and we will keep you posted as we go.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can typically use the bath the next day.

What it costs in HP16

Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Why clients in HP16 choose us

  • No need to remove anything
  • Work done at your home or business
  • CHAS, Constructionline and SafeContractor accredited
  • Straight answers about what a repair can do

Get a quote

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Landmarks near Prestwood

Around Prestwood, we work in homes near Holy Trinity Church, Missenden Abbey Adult Education College and Prestwood Junior School and the streets around them. Other local landmarks include Travellers Rest pub (within half a mile north-east) and Misbourne School (1.4 miles east). The closest station to Prestwood is Great Missenden station, roughly 1.2 miles east of the centre. Nearby you will also find Roald Dahl Museum and Story Centre (1.3 miles east) and Great Missenden (2.1 miles east). For a walk, there is Prestwood Local Nature Reserve and Coombe Hill.

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • Clean with warm water and a mild detergent
  • Keep abrasive pads and gritty cleaners away from the bath
  • Rinse the bath after use, especially in hard water areas
  • Fix dripping taps early to stop staining and limescale

Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.

When a repair is not the answer

We will not take on work that won’t last, so these are the limits:

  • Metal that has corroded all the way through
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that moves underfoot, until its support is fixed

What we’re called out for in HP16

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.

Contact us if you’ve noticed any of these:

  • Rusty patches near the plughole
  • A chip where the taps sit
  • A failed DIY repair that’s discoloured or lifting
  • Chips caused by builders

Repairs by material

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Common questions in HP16

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is a cracked acrylic bath repairable?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.

Do you come to HP16?

Yes, we do. Technicians travel to HP16 from across the region, and the price is the same as everywhere else.

Can you redo an old repair?

Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.

What areas do you cover?

Across the UK. Prices don’t change with location.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Is a bath repair durable?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.