Bradford · England

Bath & shower resealing (mastic) in Bankfoot, Bradford

Bath resealing across Bankfoot and nearby, generally in one visit and guaranteed for a year.

  • Old sealant that looks dirty
  • Black spots in the silicone
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Bankfoot homes

What we do, step by step

Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take about two hours for a bath, and we leave the room as we found it.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Let us know if it has been repaired before
  • Clear the area around the damage

Ask for a price

If you are in Bankfoot and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Get a fixed quote

Advice

Bath resealing in Bankfoot without replacing anything

A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why so many DIY reseals peel. We regularly repair basins & vanity units, kitchen worktops & sinks and wet rooms, and common reasons people get in touch are black mould in the sealant and old sealant that looks dirty.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Area
Bankfoot (BD5, BD6, BD12)
Area hub
Bradford
Guarantee
12 months on all our work
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Covering Bankfoot

Bankfoot is about 2 miles south of Bradford, in Bradford. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bankfoot is one of 140 places in Bradford where we work. Our jobs stretch from Bankfoot to Leeds (9 miles away).

Our visits in BD5, BD6 and BD12 work the same way as everywhere else we cover. Local streets include Acre Lane, Dean Road and Mayo Road, and we cover them all. If you are just outside Bankfoot, we cover Staithgate (1 mile east), Wibsey (1 mile west), North Bierley (1 mile south), West Bowling (1 mile north-east) and Odsal (1 mile south). Further out, we also cover Keighley (9 miles north-west), Bingley (6 miles north-west), Shipley (4 miles north), Baildon (6 miles north), Ilkley (11 miles north) and Queensbury (4 miles west).

Around Bankfoot

Locally, our jobs take us to homes close to Co-op Academy Grange, Bradford City Park and Church of St Mathew. Also close by are The Red Lion pub (under half a mile south-east), Bankfoot Primary School (less than half a mile north), Buttershaw Business and Enterprise College (1.3 miles west) and Bradford Mechanics' Institute Library (1.8 miles north). For rail, the closest station is Low Moor station, about 1.4 miles south of the centre. Nearby you’ll also find Transperience (1.3 miles south-east) and Kirkgate Shopping Centre (1.8 miles north). Green spaces nearby include Heaton Reservoir Nature Reserve and Idle Hill.

Map of Bankfoot © OpenStreetMap contributors

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Let steam out after showers
  • Clean the joints with a mild cleaner
  • Use the extractor fan
  • Wipe the joints dry after use

Leave the sealant to cure for the time we give you, normally about a day.

Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

What we are called out for in Bankfoot

Poor ventilation speeds things up: damp hangs around, and mould takes hold.

Signs it’s time to call us include:

  • Gaps in the seal
  • Silicone smeared on tiles
  • Old sealant that looks dirty
  • Missing sealant behind the taps

Before booking anyone

  • What prep work is covered
  • What aftercare is recommended
  • The length of the guarantee and what it covers
  • Whether there are any call-out or travel charges

10 questions to ask before you book

When we would advise against a repair

A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:

  • Hollow or loose tiles
  • Very wide gaps that need a trim
  • Rotten walls or floors behind the bath

Send us photos and we will tell you honestly.

Materials we repair

  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures

Repairs by material

Baths

Baths are resealed with water in them, to open the joint fully.

Shower trays

Trays are sealed with weight on them, for the same reason.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

What affects the price in Bankfoot

We price every job individually. The main factors are:

  • The type of damage
  • Unusual colours or finishes
  • The material and finish
  • How much damage there is

We charge the same wherever you are, with no extra for Bankfoot. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from pictures

Two or three clear pictures are normally enough. It helps if you send:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • Something in shot to show the size
  • Where you are, by postcode

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Common questions in Bankfoot

How do I stop mould in sealant?

Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

What happens once I’ve sent pictures?

We review the pictures and send a fixed quote and the next dates we have.

What if the damage is worse than the pictures show?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

What do you need from me?

Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.

Can you reseal over the old silicone?

No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.

How quickly can you book me in?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Do you work in Bankfoot?

We do. We send a technician to Bankfoot for every job, with no extra charge for travel.

Why it’s worth resealing in Bankfoot

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why Bankfoot customers choose us

  • CHAS and Constructionline accredited
  • Rooms protected and left tidy
  • No need to remove anything
  • One visit for most repairs

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.