Hampshire · England
Bath Resealing in Barton on Sea
Bath resealing for Barton on Sea, without a refit. Send us pictures for a fixed price, then we come to you.
- Stained silicone
- A messy previous reseal
- Unsealed corners
How we handle bath resealing in Barton on Sea
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. We work on basins & vanity units, kitchen worktops & sinks and shower trays & enclosures, and common reasons people get in touch are mould you can’t clean out and a messy previous reseal.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Barton on Sea (BH25)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
There’s no charge for travel to Barton on Sea. The price comes down to:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- Unusual colours or finishes
- The material
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Your postcode, so we can check dates
- A photo taken from further back
- Something in shot to show the size
- A close-up of the damage, in focus
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for around two hours. Before we go, we’ll explain when it can be used and how to care for it.
- First we strip out every bit of the old mastic.
- Next we clean the joint and deal with mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
- Clear the area around the damage
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Related advice
Towns and villages near Barton on Sea
Also in Barton on Sea
Common questions in Barton on Sea
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Do you come to Barton on Sea?
We do. We send a technician to Barton on Sea for every job, and the price is the same as everywhere else.
How long will it take?
Most reseals take about two hours. Leave it to cure before use.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does silicone take to cure?
We will give you the curing time, typically around a day.
What happens next?
We come back with a fixed price, plus dates. There’s no obligation to book.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What a repair cannot fix
We would rather lose a job than do one that will not last, so these are the limits:
- Gaps too big for silicone alone
- A flexing bath
- Tiles that move, until they’re refixed
Send us photos and we will tell you honestly before you book.
Materials we work on in Barton on Sea
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
Do you need bath resealing in Barton on Sea?
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning can’t get it all out.
The things customers normally mention when they call include:
- An untidy old seal
- Damp near the bath
- Sealant that is split or lifting
- Black spots in the silicone
What your quote should include
- Aftercare advice
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- Whether they match the colour on site
Barton on Sea and nearby
Barton on Sea is about 4 miles east of Christchurch, in Hampshire. Jobs in Barton on Sea are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages.
Every address in BH25 is covered. Jobs here include addresses on Barton Drive, Heathy Close and Barton Way. If you are just outside Barton on Sea, we cover New Milton (1 mile north), Walkford (1 mile west), Highcliffe (1 mile west), Ashley (2 miles north-east) and Downton (2 miles east). We also work in nearby towns such as Totton (14 miles north-east), Lymington (5 miles east), Hythe (14 miles north-east), Ringwood (9 miles north-west), Dibden Purlieu (13 miles north-east) and Marchwood (14 miles north-east).
What’s near Barton on Sea
Locally, our jobs take us to homes close to New Milton Infant School, Parish Church of St Magdalene and The Arnewood School. Nearby too are The George Centre pub (within half a mile north) and The Arnewood School (0.6 miles north). The closest station to Barton on Sea is New Milton station, about 1 mile north. A little further out are Highcliffe Castle (2.2 miles west) and Lymington New Forest Hospital (5.5 miles east). Green spaces nearby include Milford on Sea LNR.
Landlords, agents and businesses in Barton on Sea
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Why it’s worth resealing in Barton on Sea
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Barton on Sea customers choose us
- We leave the room as we found it
- One visit for most repairs
- Technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
Read our pricing.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
About our accreditations · Every repair comes with a one-year guarantee.
