Hampshire · England
Bath Resealing for Ringwood homes
Bath resealing for Ringwood, without a refit. Send us pictures for a fixed price, then we come to you.
- Black mould in the sealant
- A messy previous reseal
- Sealant that’s split or lifting
When a repair isn’t the answer
To be straight with you, there are a few things a repair will not fix:
- Hidden water damage
- Movement in the bath or tray
- Hollow or loose tiles
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
- Baths
Bath resealing at your home in Ringwood
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. If you are dealing with discoloured, yellow sealant and black spots in the silicone, we can generally put it right, on kitchen worktops & sinks, shower trays & enclosures and baths alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Ringwood (BH24)
- County
- Hampshire
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Ringwood
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
Contact us if you’ve noticed any of these:
- Black spots in the silicone
- Missing sealant behind the taps
- Damp near the bath
- An untidy old seal
Comparing quotes
- What protection goes down before work starts
- What prep work is covered
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
What happens on the day
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take around two hours, and the room is left clean and tidy.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Let us know about parking or access
- Let us know which floor the room is on
- Point us to the nearest place to park
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Related advice
Prices and what affects them
There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- The material
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
It only takes a minute to photograph the damage. Try to send:
- Natural light rather than flash
- A close-up of the damage, in focus
- Where you are, by postcode
- Whether it’s been repaired or coated before
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Work for landlords and builders
For anyone letting property in or around Ringwood, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Covering Ringwood
Ringwood is about 7 miles north of Christchurch, in Hampshire. Whether you’re in the middle of Ringwood or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 683 places in Hampshire.
Our technicians cover all of the BH24 postcode area. From Addison Square, High Street and Market Place or a nearby road, a technician can come to you. Ringwood sits on or near the A31 and A338, which makes travel easy. If you are just outside Ringwood, we cover Poulner (1 mile north-east), Hightown (1 mile south-east), Upper Kingston (1 mile south), Blashford (1 mile north) and Crow (1 mile south-east). Larger places within reach include Totton (13 miles east), Lymington (12 miles south-east), New Milton (8 miles south-east), Barton on Sea (9 miles south-east), Marchwood (15 miles east) and Ashley (8 miles south-east).
Local landmarks in Ringwood
Locally, our jobs take us to homes close to The Lamb Inn, Ringwood Church of England Infant School and Ringwood Waldorf School and the streets around them. Also close by are Avon Heath Country Park (2 miles south-west), Ringwood School (under half a mile north-west) and Trinity Congregational Church (less than half a mile south-west). Other landmarks nearby include St Leonard's Hospital (3.9 miles south-west). The countryside around Ringwood includes Blashford Lakes and Linbrook Lake.
Nearby places to Ringwood
What else we do in Ringwood
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
FAQs for Ringwood
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What areas do you cover?
We work UK-wide, and that includes Ringwood. Our prices are the same everywhere.
How do I get a price for bath resealing in Ringwood?
The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
When can I use the bath after resealing?
Normally about a day later. We’ll tell you the exact time.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Looking after it afterwards
Once the work has cured, treat it gently:
- Give the seal a regular clean
- Reseal when black spots will not clean off
- Use the extractor fan
- Do not stand toiletries on the seal
Good ventilation is the best protection, and dry the joints after bathing.
Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
About our accreditations · Every repair comes with a one-year guarantee.
