East Riding of Yorkshire · England
Bath & shower resealing (mastic) in Beverley, East Riding of Yorkshire
Bath resealing in and around Beverley: photo quotes, tidy work and a year’s guarantee.
- An untidy old seal
- Discoloured, yellow sealant
- Leaks at the edges
How we handle bath resealing in Beverley
Resealing is quick, but it transforms the look. Fresh joints make the entire room look cleaner, and they keep water out. We work on baths, kitchen worktops & sinks and wet rooms, and common reasons people contact us are a messy previous reseal and damp near the bath.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Beverley (HU17)
- Area hub
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quote
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Is resealing worth it?
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
- Every repair guaranteed for a year
Read our pricing.
Towns and villages near Beverley
Other services in Beverley
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- A bath or tray that moves, until its support is fixed
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Beverley
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for about two hours for a bath from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First we strip out every bit of the old mastic.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Before we arrive
- Let us know which floor the room is on
- Make sure the area is dry
- Keep a parking space free if you can
Get a quote
If you are in Beverley and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Beverley and nearby
Beverley is about 7 miles north-west of Kingston upon Hull, in East Riding of Yorkshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover all 299 towns and villages across East Riding of Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 46 miles away.
Here we cover the HU17 postcode area. Jobs here include addresses on Register Square, Wednesday Market and Saturday Market and the roads around them. Beverley is on the A164 and A1174, so it’s easy for us to reach. Other places close to Beverley include Molescroft (1 mile north-west), Hull Bridge (2 miles north-east), Broadgate (2 miles south-west), Bentley (2 miles south-west) and Walkington (3 miles south-west). Within a short drive, we also cover Driffield (11 miles north), Pocklington (15 miles north-west), Hessle (8 miles south), Cottingham (4 miles south), Hornsea (12 miles north-east) and Market Weighton (10 miles west). Beverley is among the bigger towns we cover in East Riding of Yorkshire.
Landmarks near Beverley
In Beverley, that means homes near Beverley Masonic Hall, Beverley High School and Beverley St Nicholas Community Primary School, among other places. Also close by are The Queens Head pub (under half a mile south-east) and Beverley Minster (less than half a mile south-east). Beverley has its own railway station: Beverley station. Further afield, we also cover the area around East Riding Community Hospital (0.9 miles north-east) and Baynard Castle (4.1 miles south).
FAQs for Beverley
How do I stop mould in sealant?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
Are there extra charges for Beverley?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens after I send pictures?
We come back with a fixed quote, typically with dates to choose from. You are under no obligation.
Do you come to Beverley?
We do. Repair technicians travel to Beverley from across the region, with no extra charge for travel.
Can you reseal over the old silicone?
Never over old. The old sealant is cut out and the joint cleaned and dried.
What we’re called out for in Beverley
Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.
You may need us if you’ve spotted:
- Old sealant that looks dirty
- Gaps by the taps
- Damp near the bath
- Sealant that is split or lifting
What to look for in a quote
- Whether the colour is mixed to match
- How the room is protected while they work
- Whether the price covers travel
- A fixed quote, and whether VAT is included
What affects the price in Beverley
There’s no area surcharge for Beverley. What changes the price is:
- The type of damage
- Access to the area
- Previous DIY repairs that have to come out
- The material
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Two or three clear pictures are normally enough. Try to include:
- The material, if you know it
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- A photo taken from further back
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say right away whether it can be repaired.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Reseal at the first sign of lifting
- Keep the joints dry
- Clean the sealant gently and regularly
- Ventilate the bathroom well
Good ventilation is the best protection, and wipe the joints after use.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
