Central Bedfordshire · England
Bath Resealing for Biggleswade homes
Bath resealing across Biggleswade and nearby, done in a single visit in most cases.
- Mould you can’t clean out
- Stained silicone
- Missing sealant behind the taps
How we handle bath resealing in Biggleswade
Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Typical jobs include silicone smeared on tiles and stained silicone, on wet rooms, shower trays & enclosures and basins & vanity units.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Biggleswade (SG18)
- Region
- Central Bedfordshire
- Guarantee
- One year on every repair
- Price
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Clean the sealant gently and regularly
- Keep the joints dry
- Replace the seal when mould sets in
- Use the extractor fan
Avoid scraping the joints, and keep shampoo bottles off the joints.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
How we price bath resealing
You will not pay by the hour. The price depends on:
- Where the damage is and how we get to it
- What the surface is made of
- The colour and finish to match
- How many items we do on one visit
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
You can take the photos on your phone. Just make sure we can see:
- A photo taken from further back
- What it’s made of, if you know
- Natural light rather than flash
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Also near Biggleswade
More services for Biggleswade
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Rotten walls or floors behind the bath
- A bath or tray that moves, until its support is fixed
- Very wide gaps that need a trim
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
- Baths
When to call us in Biggleswade
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
Typical reasons for a call-out include:
- Water getting behind the bath or tray
- Sealant that’s split or lifting
- A messy previous reseal
- Black spots in the silicone
What your quote should include
- When it can be used again
- Whether they match the colour on site
- How the room is protected while they work
- Whether the price is fixed and includes VAT
Why it’s worth resealing in Biggleswade
Sealing over old silicone is a false economy. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why Biggleswade customers choose us
- Fixed prices from your photos
- We come to you, anywhere in the UK
- No need to remove anything
- Every repair guaranteed for a year
Take a look at our prices page.
Landlord and trade work in Biggleswade
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Our work in Biggleswade
Biggleswade is about 10 miles east of Bedford, in Central Bedfordshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Biggleswade is one of 121 places in Central Bedfordshire we cover. You can also see our page for London, about 41 miles away.
Jobs in SG18 are booked in the same way as anywhere else. From High Street, Station Road and London Road or a nearby road, a technician can come to you. Biggleswade sits on or near the A1 and B659, so getting to you is simple. We also cover the places around Biggleswade: Holme (2 miles south-west), Upper Caldecote (2 miles west), Broom (2 miles south-west), Langford (3 miles south) and Astwick (4 miles south). Larger places within reach include Flitwick (12 miles south-west), Sandy (4 miles north-west), Shefford (5 miles south-west), Ampthill (11 miles south-west), Lower Stondon (6 miles south) and Potton (3 miles north-east). As one of the bigger places in Central Bedfordshire, Biggleswade sees plenty of our work.
Local landmarks in Biggleswade
Around Biggleswade, we work in homes near Red Lion Public House, Ivel Valley School and Church of St Andrew, among other places. Also close by are Lawnside Lower School (under half a mile west) and Stratton Upper School (under half a mile south). The nearest railway station is Biggleswade station, about 0.5 miles south-west of the centre. Further afield, we also cover the area around Jordans Mill (1.4 miles south-west) and Biggleswade Hospital (0.7 miles north). Open spaces near Biggleswade include Warren Villas.
The process
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a couple of hours for most jobs. The room is left tidy.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Read more
Biggleswade questions
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Do you seal over the old sealant?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Why does the silicone keep cracking?
Usually because the bath or tray moves. We fill the bath before sealing it.
How do I get a price for bath resealing in Biggleswade?
We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
About our accreditations · Every repair comes with a one-year guarantee.
