Highland · Scotland

Bath Resealing for Bonar Bridge homes

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Bonar Bridge. Free, fixed quotes from your photos.

  • Silicone smeared on tiles
  • Leaks at the edges
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Bonar Bridge homes

When a repair isn’t the answer

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Water damage behind the bath that needs a builder
  • Gaps so wide they need filling or trims before sealing
  • Movement in the bath or tray

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Wet rooms
  • Shower trays & enclosures

About our bath resealing in Bonar Bridge

The key to a good reseal is getting all of the old silicone out. New silicone will not bond to old, which is why many DIY jobs peel. If you are dealing with black spots in the silicone and stained silicone, we can usually put it right.

Every repair is covered by our one-year guarantee, wherever you are in Highland.

Area
Bonar Bridge (IV24)
Area hub
Highland
Cover
12 months on all our work
Price
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Do you need bath resealing in Bonar Bridge?

Most reseals are because of black mould. It grows into the silicone, so cleaning can’t get it all out.

Typical reasons for a call-out include:

  • Black mould in the sealant
  • Gaps in the seal
  • Discoloured, yellow sealant
  • Missing sealant behind the taps

Before you book anyone

  • What protection goes down before work starts
  • Whether the colour is mixed to match
  • What prep work is covered
  • How soon you can use it again

How to compare quotes

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

Bonar Bridge questions

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How do I book?

Send pictures through the quote form or call 0345 017 0787.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

What areas do you cover?

The entire UK, including all of Highland. Just include your postcode and we will offer you dates.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Can new silicone go over old?

All the old sealant comes out. Fresh silicone does not stick to old.

Can you redo someone else’s repair?

Usually, yes. We remove the old repair before doing a new one.

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

Baths are resealed with water in them, to open the joint fully.

How we price bath resealing

There are no hourly rates or hidden extras. The price is based on:

  • The material and finish
  • Where the damage is and how we get to it
  • The type of damage
  • Whether old repairs or coatings need taking off

Our prices are the same across the UK, so there’s no premium for Bonar Bridge. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from photos

Phone photos are fine. Ensure they show:

  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • The material, if you know it
  • A coin beside the damage so we can judge size

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Clean the sealant gently and regularly
  • Air the room after use
  • Dry the seal after bathing
  • Reseal at the first sign of lifting

Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Landlords, agents and businesses in Bonar Bridge

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

The process

Here’s how a visit normally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for around two hours from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Getting ready for the visit

  • Ensure the area is dry
  • Let us know if it has been repaired before
  • Open a window if you can

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Related advice

Our work in Bonar Bridge

Bonar Bridge is about 28 miles north-west of Nairn, in Highland. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 253 places across Highland.

Every address in IV24 is covered. Whether you live on Migdale Road, Gilmour Crescent and Swordale Crescent or anywhere nearby, we can come to you. Neighbouring places we cover include Ardgay (1 mile south-west), Lower Gledfield (1 mile south-west), Spinningdale (4 miles east), Whiteface (6 miles east) and Edderton (7 miles south-east). Further out, we also cover Tain (12 miles south-east), Alness (14 miles south), Dornoch (12 miles east), Invergordon (15 miles south-east) and Golspie (15 miles east). Remote and island addresses take a little more planning, so it’s best to call first.

What’s near Bonar Bridge

Around Bonar Bridge, we work in homes near Creich Church of Scotland Parish Church and the streets around them. Bonar Bridge’s nearest station is Ardgay station, roughly 1 mile south-west. Further afield, we also cover the area around Migdale Hospital (under half a mile south-east). Not far away are Dùn Creich and Loch Migdale.

Map of Bonar Bridge © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.