Highland · Scotland

Bath & shower resealing (mastic) in Whiteface, Highland

Bath resealing in and around Whiteface: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Water getting behind the bath or tray
  • Mould you cannot clean out
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Whiteface homes

What your bath or shower is made of matters

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

About our bath resealing in Whiteface

A reseal is a small job that makes a big difference. Clean, white joints make a bathroom look cared for, and they protect the walls and floor. Typical jobs include discoloured, yellow sealant and damp near the bath, in wet rooms, shower trays & enclosures and kitchen worktops & sinks.

You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.

Where
Whiteface (IV25)
Area hub
Highland
Cover
12 months on all our work
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Landlords, agents and businesses in Whiteface

If you manage property in Whiteface, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

What we cannot put right

To be straight with you, there are a few things a repair will not fix:

  • Water damage behind the bath that needs a builder
  • Gaps too big for silicone alone
  • Movement in the bath or tray

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths

Is resealing worth it?

A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

What you get with us

  • One visit for most repairs
  • We leave the room as we found it
  • A fixed quote before booking
  • Every repair guaranteed for a year

Take a look at our pricing.

Whiteface and nearby

Whiteface is about 23 miles north-west of Nairn, in Highland. Clients in Whiteface get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Whiteface is one of 253 places in Highland we cover.

We cover every part of IV25. Being close to the A949, Whiteface is easy for our repair technicians to reach. Close by, we cover Spinningdale (2 miles west), Edderton (3 miles south), Camore (4 miles east), Dornoch (5 miles east) and Hilton (6 miles east). We also work in nearby towns such as Tain (6 miles south-east), Alness (13 miles south), Invergordon (13 miles south), Golspie (10 miles north-east), Brora (15 miles north-east) and Cromarty (14 miles south). Some remote addresses need extra planning, so it’s best to call first.

Around Whiteface

Well-known places in the area include Proncy Castle (4.3 miles north-east). For a walk, there’s Loch a' Ghiubhais and Struie Hill.

Map of Whiteface © OpenStreetMap contributors

How the visit works

We begin by going over the job with you. After that, protection goes down around the work area and the work begins. Allow about two hours for a bath, and we’ll tell you if anything changes.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

How to prepare

  • Ensure the area is dry
  • Clear the area around the damage
  • Let us know if it has been repaired before

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a fixed price

Related advice

How to look after the repair

Once the work has cured, treat it gently:

  • Keep bottles off the joints
  • Give the seal a regular clean
  • Replace the seal when mould sets in
  • Run the extractor fan during and after showers

Leave the sealant to cure for the time we give you, normally about a day.

Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

Prices and what affects them

Each job gets its own fixed quote. This is what makes a difference:

  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • How easy the damage is to reach
  • What the surface is made of

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Getting a price from photos

Two or three clear photos are usually enough. Try to include:

  • Whether it’s been repaired or coated before
  • A photo taken from further back
  • A close-up of the damage, in focus
  • Any details about the material

The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

FAQs for Whiteface

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why does my sealant keep splitting?

Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.

Can you redo someone else’s repair?

Normally, yes. The old repair comes out first, so mention it when you send photos.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

Can you repair several things at once?

Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.

Is there any odour?

There can be some smell while we work. It clears as the materials cure.

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.