Staffordshire · England

Bath Resealing for Boney Hay homes

We travel to Boney Hay for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Damp near the bath
  • Missing sealant behind the taps
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Boney Hay

Bath resealing at your home in Boney Hay

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours. We’re often asked to fix damp near the bath and gaps by the taps, across kitchen worktops & sinks, basins & vanity units and wet rooms.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.

Where
Boney Hay (WS7, WS15)
Area hub
Staffordshire
Guarantee
One year on every repair
Price
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Water damage behind the bath that needs a builder
  • Very wide gaps that need a trim
  • Movement in the bath or tray

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Wet rooms
  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units

Boney Hay questions

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Is a repair better than a new one?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

What do you need from me?

Photos of the damage, a photo of the entire bath or shower and your postcode. Then we’ll agree a date.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How long will it take?

A bath or shower usually takes a couple of hours. Leave it to cure before use.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

When can I use the bath after resealing?

We will give you the curing time.

Signs you need bath resealing in Boney Hay

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould grows faster.

You may need us if you’ve spotted any of these:

  • Leaks at the edges
  • Mould you can’t clean out
  • A messy previous reseal
  • Old sealant that looks dirty

Before booking anyone

  • What happens if they find more damage
  • Whether a trained technician does the job
  • How the room is protected while they work
  • When it can be used again

Our hiring checklist

How we price bath resealing

Quotes are free and the price is fixed. What we take into account:

  • How easy the damage is to reach
  • The material and finish
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Whether it’s been repaired or coated before
  • A wider photo showing the entire bath or shower
  • What it’s made of, if you know
  • Something in shot to show the size

To get a price, send two or three pictures using our quote form or call us. We will say straight away if a repair is the right fix.

About Boney Hay

Boney Hay is about 1 mile north of Burntwood, in Staffordshire. Wherever you are in the WS7 postcode area, we come to you. We cover all 512 towns and villages across Staffordshire. You can also see our page for Birmingham, about 15 miles away.

Every address in WS7 and WS15 is covered, from the main roads to the quietest streets. Jobs here include addresses on Meg Lane, Oak Lane and Hill Lane and the roads around them. With the A5190 close by, Boney Hay is simple for us to get to. We also cover the places around Boney Hay: Chase Terrace (1 mile south-west), Burntwood (1 mile south), Burntwood Green (1 mile south-east), Chasetown (1 mile south) and Hammerwich (2 miles south-east). Larger places within reach include Stafford (11 miles north-west), Burton upon Trent (14 miles north-east), Tamworth (11 miles east), Cannock (4 miles west), Lichfield (4 miles east) and Rugeley (5 miles north).

What’s near Boney Hay

Around Boney Hay, we work in homes near Chase Terrace Technology College, The Nags Head pub and Prince's Park. Also close by are Boney Hay Primary Academy (under half a mile north) and St John's Community Church (0.5 miles west). For rail, the closest station is Hednesford station, about 3.5 miles north-west of the centre. A little further out are Cannock Castle Ring (1.9 miles north) and Letocetum Roman Baths And Museum (3.6 miles south-east). For a walk, there’s Minster Pool and George's Hayes.

  • Local facilities include Ogley Hay Rural (2.9 miles south-east)
Map of Boney Hay © OpenStreetMap contributors

Resealing in Boney Hay: why it matters

Putting new silicone over old does not last. It soon peels, and traps mould underneath. We remove the old sealant completely. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

What you get with us

  • Free fixed quotes from pictures
  • No need to remove anything
  • No extra charge for your area
  • Accredited with CHAS, Constructionline and SafeContractor

Read our prices page.

Landlord and trade work in Boney Hay

Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Materials and what they mean for the repair

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Air the room after use
  • Give the seal a regular clean
  • Store bottles on a shelf
  • Reseal at the first sign of lifting

Leave the sealant to cure for the time we give you, usually around 24 hours.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

How the visit works

Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for about two hours for a bath from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Make sure the room can be ventilated
  • Keep children and pets away from the room on the day

Getting a price

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.