Perth and Kinross · Scotland

Bath Resealing in Boreland

Fixed-price bath resealing in Boreland and the surrounding area, normally in one visit.

  • Unsealed corners
  • A messy previous reseal
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Boreland

How we handle bath resealing in Boreland

Baths are resealed with water in them, so the joint is at its widest, so the seal does not tear when the bath is first used. Our technicians work on wet rooms, baths and shower trays & enclosures, and people most often call us about old sealant that looks dirty and unsealed corners.

Every repair comes with a one-year guarantee, wherever you are in Perth and Kinross.

Location
Boreland (PH15)
County
Perth and Kinross
Warranty
A year, on every repair
Quote
Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How we price bath resealing

We price every job individually. What matters most is:

  • What the surface is made of
  • How hard the colour is to match
  • How many items we do on one visit
  • Whether old repairs or coatings need taking off

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send pictures for a quote

We price nearly every job from photos. This is what we need:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Do you need bath resealing in Boreland?

Poor ventilation speeds things up: moisture sits on the joints longer, and mould takes hold.

The things customers normally mention when they call are:

  • A messy previous reseal
  • Silicone coming away from the tiles
  • Leaks at the edges
  • Mould you cannot clean out

Comparing quotes

  • If travel is included in the price
  • Whether the price is fixed and includes VAT
  • When it can be used again
  • What happens if they find more damage

Choosing a repair company

Landlord and trade work in Boreland

We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Resealing in Boreland: why it matters

Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

What you get with us

  • We come to you, anywhere in the UK
  • One visit for most repairs
  • Honest advice, even when it means no job
  • Nothing taken out or refitted

Take a look at our pricing.

About Boreland

Boreland is about 17 miles north-west of Crieff, in Perth and Kinross. Jobs in Boreland are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Boreland is one of 107 towns and villages in Perth and Kinross where we work. We work right across the region, from Boreland to Glasgow (about 50 miles away).

All of PH15 is covered, from the main roads to the quietest streets. From Tay Sealladh and Tigh na Loan or anywhere nearby, a technician can come to you. Neighbouring places we cover include Fearnan (1 mile east), Acharn (3 miles east), Kenmore (4 miles east), Aberfeldy (9 miles east) and Kinloch Rannoch (9 miles north-west).

Landmarks near Boreland

Well-known places in the area include Scottish Crannog Centre (3.3 miles east) and Carnbane Castle (3.2 miles north-west). Open spaces near Boreland include Drummond Hill and Lochan nan Uan.

Map of Boreland © OpenStreetMap contributors

FAQs for Boreland

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

What information do you need?

Photos of the damage, a photo of the entire bath or shower and your postcode. After that, we just agree a date.

Are there extra charges for Boreland?

There’s no separate call-out charge. The fixed price covers the visit and the work.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Is it OK to have pets in the house?

Just keep them out of the work area. We will let you know when it’s safe to use again.

What a repair cannot fix

Some jobs aren’t right for a repair, including:

  • A bath or tray that moves, until its support is fixed
  • Hidden water damage
  • Hollow or loose tiles

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Baths
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • Keep the joints dry
  • Give the seal a regular clean
  • Reseal at the first sign of lifting
  • Open a window after bathing

Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.

How it works

Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a couple of hours.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Open a window if you can
  • Keep pets and children out of the room while we work
  • Keep a parking space free if you can

Get a quote

If you are in Boreland and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.