Wiltshire · England

Bath Resealing for Bottlesford homes

Fixed-price bath resealing in Bottlesford and the surrounding area, done in a single visit in most cases.

  • Black spots in the silicone
  • Damp near the bath
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Bottlesford

Bath resealing in Bottlesford, done in place

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. If you are dealing with gaps in the seal and old sealant that looks dirty, we can usually put it right.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Bottlesford (SN9)
Area hub
Wiltshire
Cover
One year on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What affects the price in Bottlesford

We charge the same across the UK, including Bottlesford. What changes the price is:

  • What kind of damage it is
  • How hard the colour is to match
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your photos

Photographing the damage takes a minute. Try to send:

  • One sharp close-up of the damage
  • The material, if you know it
  • A wider photo showing the entire bath or shower
  • Any earlier repairs or coatings

Send us photos of the damage and one of the whole item, and tell us you’re in Bottlesford, and we’ll come back with a fixed quote.

The process

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes about two hours for a bath, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Before we arrive

  • Keep children and pets away from the room on the day
  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a free quote

Advice

Do you need bath resealing in Bottlesford?

Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.

People normally call us after spotting one of these:

  • Silicone coming away from the tiles
  • A messy previous reseal
  • Missing sealant behind the taps
  • Black spots in the silicone

What to look for in a quote

  • Whether a trained technician does the job
  • If travel is included in the price
  • Aftercare advice
  • Is the price fixed, and does it include VAT?

Choosing a repair company

Is resealing worth it?

Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Why Bottlesford customers choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit
  • One-year guarantee on every repair
  • Honest advice, even when it means no job

See our full price list.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

Aftercare tips

So the finish stays in good condition:

  • Air the room after use
  • Reseal when black spots will not clean off
  • Give the seal a regular clean
  • Use the extractor fan

Good ventilation is the best protection, and dry the joints after bathing.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

About Bottlesford

Bottlesford is about 6 miles east of Devizes, in Wiltshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Bottlesford is one of 425 places in Wiltshire where we work. Our nearest city page is London, about 76 miles away.

Here we cover the SN9 postcode area. Streets in the area include Wilsford Road, Gores Lane and Martin's Close, and we cover them all. Neighbouring places we cover include Hilcott (1 mile south), Woodborough (1 mile north-east), Beechingstoke (1 mile west), Marden (2 miles south-west) and Charlton St Peter (2 miles south). Further out, we also cover Chippenham (15 miles north-west), Calne (10 miles north-west), Devizes (6 miles west), Melksham (13 miles west), Amesbury (12 miles south) and Marlborough (8 miles north-east).

Local landmarks in Bottlesford

We visit homes around Church of St Mary Magdalen and Woodborough Church of England Primary School and the streets around them. For rail, the closest station is Pewsey station, about 3.4 miles east. Other landmarks nearby include Pewsey Heritage Centre (3.6 miles east). Green spaces nearby include Knap Hill.

Map of Bottlesford © OpenStreetMap contributors

Landlords, agents and businesses in Bottlesford

For anyone letting property in or around Bottlesford, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Questions from Bottlesford

How long does a reseal take?

A bath or shower typically takes a couple of hours. Leave it to cure before use.

What happens after I send pictures?

We come back with a fixed quote, generally with dates to choose from. There is no obligation to book.

Why does my sealant keep going mouldy?

Mould needs moisture. Ventilation and drying keep it clean longer.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

When can I use the bath after resealing?

We’ll give you the curing time.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Wiltshire.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.