Kent · England

Bath Resealing in Boughton Malherbe

Bath resealing for Boughton Malherbe, without a refit. Get a fixed quote from your photos, then book a visit.

  • Stained silicone
  • Mould you cannot clean out
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Boughton Malherbe

When a repair is not the answer

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Very wide gaps that need a trim
  • Tiles that move, until they’re refixed
  • A bath or tray that moves, until its support is fixed

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms

Bath resealing at your home in Boughton Malherbe

A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. Common call-outs are for stained silicone and mould you can’t clean out, on basins & vanity units, wet rooms and kitchen worktops & sinks.

Every repair is covered by our one-year guarantee.

Roll-top bath being refinished by a Surface Doctor technician
Where
Boughton Malherbe (ME17)
County
Kent
Warranty
One year on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Questions from Boughton Malherbe

Why does my sealant keep splitting?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Is there any odour?

There can be some smell while we work. It fades as everything cures.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is repairing better than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

How do I stop mould in sealant?

Damp is the cause. Ventilation and drying keep it clean longer.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Landlords, agents and businesses in Boughton Malherbe

We regularly work with letting and managing agents. Send the address, photos and access details.

We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

When to call us in Boughton Malherbe

Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

It’s worth getting a quote if you see:

  • Silicone smeared on tiles
  • Sealant that is split or lifting
  • Mould you cannot clean out
  • Old sealant that looks dirty

Questions to ask before you book

  • How to look after the finish
  • Whether they match the colour on site
  • How changes to the job are handled
  • A fixed quote, and whether VAT is included

10 questions to ask before booking

Our work in Boughton Malherbe

Boughton Malherbe is about 8 miles south-east of Maidstone, in Kent. Jobs in Boughton Malherbe are booked in like any other job: a fixed price from your photos, then a visit to do the work. Boughton Malherbe is one of 922 places in Kent where we work. You can also see our page for London, about 39 miles away.

Postcode districts we cover here: ME17. Neighbouring places we cover include Liverton Street (1 mile north-west), Grafty Green (1 mile south-west), Platt's Heath (1 mile north-west), Sandway (1 mile north) and Broadstone (1 mile south-west). Further out, we also cover Maidstone (8 miles north-west), Ashford (9 miles south-east), Sittingbourne (9 miles north), Faversham (11 miles north-east), Minster (15 miles north) and Kings Hill (13 miles west).

Near you in Boughton Malherbe

Around Boughton Malherbe, we work in homes near Church of St Nicholas, Platts Heath Primary School and The Kings Head Public House. Also close by are The Lenham School (1.8 miles north-east) and Kiln Wood (1.3 miles north). Boughton Malherbe’s nearest station is Lenham station, roughly 1.5 miles north-east of the centre. Other landmarks nearby include Coldbridge Castle (1.1 miles south) and The Dog Collar Museum (3.5 miles north-west).

Map of Boughton Malherbe © OpenStreetMap contributors

Prices and what affects them

You will know the full cost before booking. We look at:

  • How hard the colour is to match
  • Previous DIY repairs that have to come out
  • Access to the area
  • Whether we combine several jobs

Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Quotes from your pictures

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • A photo taken from further back
  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • Where you are, by postcode

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Materials and what they mean for the repair

Baths

Baths are resealed with water in them, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a couple of hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing
  • Have somewhere for us to park nearby if possible

Getting a price

Email us a photo of the damage and a wider shot of the entire item, and tell us you are in Boughton Malherbe, and we will come back with a fixed quote.

Send photos for a quote

Related advice

Why reseal now?

Putting new silicone over old doesn’t last. It soon peels, and traps mould underneath. A proper reseal removes the old first. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Boughton Malherbe

  • A year’s guarantee on all work
  • Rooms protected and left tidy
  • We come to you, anywhere in the UK
  • No extra charge for your area

Read our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.