Devon · England

Bath & shower resealing (mastic) in Bowd, Devon

Bath resealing in and around Bowd: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Stained silicone
  • Gaps by the taps
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Bowd?

Bath resealing in Bowd, done in place

The key to a good reseal is getting all of the old silicone out. New silicone won’t bond to old, which is why so many DIY reseals peel. We’re often asked to fix discoloured, yellow sealant and unsealed corners, in kitchen worktops & sinks, basins & vanity units and wet rooms.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Roll-top bath being refinished by a Surface Doctor technician
Where
Bowd (EX10)
Region
Devon
Warranty
One year on every repair
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

Landlords, agents and businesses in Bowd

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.

How we price bath resealing

We charge the same across the UK, including Bowd. What changes the price is:

  • Where the damage is and how we get to it
  • Whether we combine several jobs
  • How hard the colour is to match
  • What the surface is made of

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed price

Two or three clear photos are usually enough. It helps if you send:

  • Details of any past repairs
  • The material, if you know it
  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.

How the visit works

Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for about two hours for a bath from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Keep pets and children out of the room while we work
  • Have a window or extractor fan available

Get a quote

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a fixed price

Advice

Bowd: your questions answered

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

Do you charge for travel?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Why does mould come back so fast?

Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Is a repair better than a new one?

Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What areas do you cover?

Across the UK. Prices do not change with location.

How do I get a price for bath resealing in Bowd?

Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item with your EX10 postcode.

Bowd and nearby

Bowd is about 1 mile north-west of Sidmouth, in Devon. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Bowd is one of 586 places in Devon we cover.

We cover every part of the EX10 postcode area and the streets around it. We also travel to Stowford (1 mile south-east), Harpford (1 mile west), Tipton St John (1 mile north-west), Sidford (2 miles east) and Metcombe (2 miles north-west). Within a short drive, we also cover Exeter (11 miles west), Exmouth (8 miles south-west), Teignmouth (15 miles south-west), Honiton (7 miles north-east), Dawlish (12 miles south-west) and St Thomas (12 miles west).

Local landmarks in Bowd

Locally, our jobs take us to homes close to St Francis of Assisi and Sidmouth College, among other places. Other landmarks nearby include Sidmouth Hospital (1.9 miles south-east) and Sidmouth Toy & Model Museum (2.1 miles south-east). The countryside around Bowd includes Peak Hill and Aylesbeare Common RSPB reserve.

Map of Bowd © OpenStreetMap contributors

Honest limits

In fairness, some problems need a different fix:

  • Loose tiles, which need refixing first
  • Rotten walls or floors behind the bath
  • Gaps so wide they need filling or trims before sealing

Not sure? Send photos and we will give you a straight answer before booking.

Surfaces we repair

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Wet rooms

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Wipe the joints dry after use
  • Reseal when black spots won’t clean off
  • Clean the joints with a mild cleaner
  • Run the extractor fan during and after showers

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

What we’re called out for in Bowd

Joints split if the bath or tray moves, often because it was sealed with the bath empty.

These are the problems we are asked about most:

  • Gaps by the taps
  • Sealant that is split or lifting
  • Silicone smeared on tiles
  • Discoloured, yellow sealant

Before booking anyone

  • What happens if the damage is worse than the pictures show
  • How to care for the finish
  • Whether the price covers travel
  • Who will actually do the work

Choosing a repair company

Resealing in Bowd: why it matters

Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why Bowd customers choose us

  • A year’s guarantee on all work
  • CHAS and Constructionline accredited
  • Nothing taken out or refitted
  • Fixed prices from your photos

Read our prices page.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.