Devon · England
Bath Resealing for Brimley homes
Bath resealing in and around Brimley: photo quotes, tidy work and a year’s guarantee.
- Black spots in the silicone
- Old sealant that looks dirty
- Damp near the bath
What affects the price in Brimley
There’s no charge for travel to Brimley. The price depends on:
- The material
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How many items we do on one visit
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- Any details about the material
- Natural light rather than flash
- One picture of the whole bath or shower
Email us a picture of the damage and a wider shot of the entire item, with your TQ13 postcode, and we’ll come back with a fixed quote.
Bath resealing in Brimley without replacing anything
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We’re frequently asked to fix black mould in the sealant and silicone coming away from the tiles, on basins & vanity units, wet rooms and kitchen worktops & sinks.
All our work is covered by our one-year guarantee, wherever you are in Devon.
- Where
- Brimley (TQ13)
- Area hub
- Devon
- Guarantee
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Do you need bath resealing in Brimley?
Most reseals are because of black mould. It grows into the silicone, so cleaning cannot get it all out.
It’s worth getting a quote if you see:
- Unsealed corners
- Discoloured, yellow sealant
- Black spots in the silicone
- Sealant that’s split or lifting
Comparing quotes
- How changes to the job are handled
- How to look after the finish
- The length of the guarantee and what it covers
- How your room will be protected
Landlords, agents and businesses in Brimley
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We are used to working with agents and managing companies. Send the address, photos and access details.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Give the seal a regular clean
- Ventilate the bathroom well
- Air the room after use
- Store bottles on a shelf
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
What else we do in Brimley
Brimley: your questions answered
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How much does bath resealing cost in Brimley?
Because every job differs, we price from pictures. You will get a fixed figure before booking.
How long does a reseal take?
Around two hours for a bath, then it needs to cure.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Why does my sealant keep splitting?
Movement is the usual cause. We fill the bath before sealing it.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
What we can’t put right
It helps to know what we cannot do too:
- A bath or tray that moves, until its support is fixed
- Gaps so wide they need filling or trims before sealing
- Loose tiles, which need refixing first
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Wet rooms
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
Where we work around Brimley
Brimley is about 5 miles north-west of Kingsteignton, in Devon. From the centre of Brimley to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 586 places across Devon.
Here we cover the TQ13 postcode area. If you are just outside Brimley, we cover Bovey Tracey (1 mile north-east), Liverton (1 mile south), Coldeast (2 miles south-east), Heathfield (2 miles south-east) and Chudleigh Knighton (3 miles east). Within a short drive, we also cover Exeter (12 miles north-east), Exmouth (13 miles east), Newton Abbot (5 miles south-east), Teignmouth (9 miles east), Kingsteignton (5 miles south-east) and Dawlish (10 miles east).
Landmarks near Brimley
We visit homes around Church of St John the Evangelist and Ilsington Church of England Primary School, among other places. Other landmarks nearby include Bovey Tracey Hospital (1.4 miles north-east) and House of Marbles (0.8 miles east). The countryside around Brimley includes Chudleigh Knighton Heath and Haytor Rocks.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
Baths are resealed with water in them, so the joint is at its widest.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a couple of hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Preparing for the visit
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
