Gloucestershire · England

Bath Resealing in Brimscombe

Bath, shower and sink resealing with new mould-resistant silicone in Brimscombe, carried out at your home and guaranteed for a year.

  • An untidy old seal
  • Stained silicone
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Brimscombe homes

Common questions in Brimscombe

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

When can I use the bath after resealing?

We’ll give you the curing time.

How long will it take?

Most reseals take about two hours. Leave it to cure before use.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

How do I book?

Use the quote form or ring 0345 017 0787.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Why does the silicone keep cracking?

Something is moving. Persistent splitting can mean the support needs attention.

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

How we handle bath resealing in Brimscombe

Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Our repair technicians work on basins & vanity units, kitchen worktops & sinks and shower trays & enclosures, and the jobs we see most are unsealed corners and discoloured, yellow sealant.

Your repair is guaranteed for a year, as with every job we do.

Where
Brimscombe (GL5)
County
Gloucestershire
Cover
12 months on all our work
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What happens on the day

We work cleanly and quietly. We protect the area first, then the job itself takes around two hours. Before we leave, we explain how soon it can be used and how to look after it.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Getting ready for the visit

  • Open a window if you can
  • Move bottles, mats and clutter away from the area
  • Mention any parking restrictions or tricky access

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Send pictures for a quote

Advice

When to call us in Brimscombe

Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.

It’s worth getting a quote if you see:

  • Silicone smeared on tiles
  • Black spots in the silicone
  • Sealant that is split or lifting
  • Unsealed corners

Comparing quotes

  • How the colour is matched
  • How the room is protected while they work
  • Whether there are any call-out or travel charges
  • What happens if they find more damage

Choosing a repair company

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

How to look after the repair

Once the work has cured, treat it gently:

  • Air the room after use
  • Ventilate the bathroom well
  • Keep bottles off the joints
  • Replace the seal when mould sets in

Avoid scraping the joints, and do not stand bottles on the seal.

Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

Brimscombe and the surrounding area

Brimscombe is about 2 miles south-east of Stroud, in Gloucestershire. Customers in Brimscombe get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Brimscombe is one of 470 places in Gloucestershire we cover. Our nearest city page is Birmingham, about 53 miles away.

Jobs in GL5 are booked in the same way as anywhere else. Whether you live on London Road, Port Lane and Albert Road or anywhere nearby, a technician can come to you. Nearby, we also work in Knave-in-hole (1 mile east), Far Thrupp (1 mile north-west), Minchinhampton (1 mile south), Brownshill (1 mile east) and Bussage (1 mile north-east). Larger places within reach include Cheltenham (13 miles north), Gloucester (9 miles north), St Paul's (13 miles north), Cirencester (10 miles east), Lansdown (13 miles north) and Fairview (14 miles north-east).

What’s near Brimscombe

In Brimscombe, that means homes near Brimscombe Church of England (VA) Primary School, The Ship Inn and Thomas Keble School and the streets around them. Also close by are Church of the Holy Trinity (within half a mile south-west) and Neu-Lindsey Nature Reserve (1.5 miles west). The nearest railway station is Stroud station, roughly 2.1 miles north-west of the centre. A little further out are Stroud General Hospital (1.8 miles north-west) and Beverston Castle (4.9 miles south). Not far away are Frome Banks and Coaley Peak.

Map of Brimscombe © OpenStreetMap contributors

Prices and what affects them

There are no hourly rates or hidden extras. The price depends on:

  • Doing more than one item at once
  • How hard the colour is to match
  • Whether it’s a chip, crack, burn or wear
  • The material

A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.

Getting a price from photos

We price nearly every job from photos. This is what to send:

  • A wider photo showing the entire bath or shower
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

What a repair cannot fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Gaps so wide they need filling or trims before sealing
  • Rotten walls or floors behind the bath
  • Hollow or loose tiles

If in doubt, send photos and we’ll say what we think.

Materials we work on in Brimscombe

  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Baths
  • Basins & vanity units

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Landlord and trade work in Brimscombe

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Housing associations and facilities teams use us for planned and reactive repairs in Gloucestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.