Somerset · England
Bath Resealing in Broadshard
Bath resealing in and around Broadshard: a fixed quote from photos, a tidy visit and a one-year guarantee.
- An untidy old seal
- Stained silicone
- Water getting behind the bath or tray
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Bath resealing in Broadshard without replacing anything
Resealing is quick, but it transforms the look. Fresh joints make the whole room look cleaner, and they keep water out. Our technicians work on wet rooms, shower trays & enclosures and kitchen worktops & sinks, and common reasons people contact us are a messy previous reseal and gaps in the seal.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Broadshard (TA18)
- Area hub
- Somerset
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Broadshard
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
Most people contact us after spotting something like this:
- Black spots in the silicone
- Sealant that’s split or lifting
- Damp near the bath
- Old sealant that looks dirty
What your quote should include
- How long the guarantee is and what it covers
- Aftercare advice
- When it can be used again
- How the room is protected while they work
Is resealing worth it?
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why Broadshard customers choose us
- One visit for most repairs
- We come to you, anywhere in the UK
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page.
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Your questions about bath resealing in Broadshard
How long does a reseal take?
Normally a couple of hours, then it needs to cure.
Do you come to Broadshard?
Yes. We work across the UK and come to Broadshard. Send pictures and we will quote, or call 0345 017 0787.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
My seal keeps tearing. Why?
Usually because the bath or tray moves. We fill the bath before sealing it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Broadshard.
Covering Broadshard
Broadshard is about 7 miles south-west of Yeovil, in Somerset. Across the TA18 area, we come to you. We work in 640 places across Somerset, from the larger towns to small villages.
We work across TA18 and the streets around it. If you’re just outside Broadshard, we cover Crewkerne (1 mile south), Puddle Town (1 mile east), Haselbury Plucknett (2 miles east), Misterton (2 miles south-east) and North Perrott (2 miles east). Within a short drive, we also cover Yeovil (7 miles north-east), Chard (7 miles west), Somerton (11 miles north), Ilminster (6 miles north-west), Preston Plucknett (7 miles north-east) and Martock (5 miles north).
Local landmarks in Broadshard
We visit homes around Antelope Inn, Wadham School and Parish Church Hall (Old Grammar School). Also close by are Ashlands Church of England First School (0.6 miles south) and Wadham School (0.6 miles south-east). For rail, the closest station is Crewkerne station, roughly 1.6 miles south of the centre. Well-known places in the area include Crewkerne Castle (1.4 miles west) and Crewkerne Community Hospital (1 mile south). For a walk, there’s Ham Hill.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Water damage behind the bath that needs a builder
- Loose tiles, which need refixing first
- A bath or tray that moves, until its support is fixed
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
What affects the price in Broadshard
Every quote is fixed and free. What we take into account:
- The material and finish
- Unusual colours or finishes
- How much damage there is
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- Something in shot to show the size
- Where you are, by postcode
- A wider photo showing the whole bath or shower
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Towns and villages near Broadshard
More services for Broadshard
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Let steam out after showers
- Clean the joints with a mild cleaner
- Do not stand toiletries on the seal
- Replace the seal when mould sets in
Avoid scraping the joints, and do not stand bottles on the seal.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a couple of hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
How to prepare
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
