Bolton · England
Bath Resealing in Burnden
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Burnden and across Bolton. Free, fixed quotes from your photos.
- Gaps by the taps
- An untidy old seal
- Black spots in the silicone
Aftercare tips
So the finish stays in good condition for years:
- Air the room after use
- Store bottles on a shelf
- Run the extractor fan during and after showers
- Dry the seal after bathing
Leave the sealant to cure for the time we give you, normally about a day.
Black mould in sealant is not just unsightly. Resealing early keeps water out of the walls and floor.
Bath resealing in Burnden without replacing anything
A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. We are frequently asked to fix damp near the bath and stained silicone, in wet rooms, basins & vanity units and baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Burnden (BL3, BL2, BL4)
- County
- Bolton
- Guarantee
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Burnden
Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.
Most people get in touch when they notice one of these:
- A messy previous reseal
- Old sealant that looks dirty
- Black spots in the silicone
- Unsealed corners
Questions to ask before you book
- How changes to the job are handled
- When it can be used again
- Aftercare advice
- A fixed quote, and whether VAT is included
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Gaps so wide they need filling or trims before sealing
- Hidden water damage
- A bath or tray that moves, until its support is fixed
Send us pictures and we will tell you honestly.
Materials we work on in Burnden
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
Burnden questions
Do you seal over the old sealant?
We always remove the old sealant completely. New silicone won’t bond to old.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
How long does a reseal take?
Around two hours for a bath, plus curing time.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Burnden?
Yes. We cover the entire UK and come to Burnden and the rest of Bolton. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Resealing in Burnden: why it matters
Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
- Work done at your home or business
- Same prices wherever you are
Take a look at our prices page.
Towns and villages near Burnden
More services for Burnden
How it works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes about two hours for a bath, and we leave the room as we found it.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Let us know about parking or access
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
How we price bath resealing
Prices are worked out job by job. The main factors are:
- How hard the colour is to match
- What kind of damage it is
- How many areas need work
- Access to the area
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Two or three clear photos are normally enough. It helps if you send:
- A picture taken from further back
- The material, if you know it
- Natural light rather than flash
- A clear, close picture of the problem area
To get a price, send two or three pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Covering Burnden
Burnden is about 2 miles south-east of Bolton, in Bolton. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover all 61 towns and villages across Bolton. You can also see our page for Manchester, about 10 miles away.
Here we cover the BL3, BL2 and BL4 postcode area. That includes homes on Green Lane, Croft Lane and Raikes Lane and the roads around them. Other places close to Burnden include Darcy Lever (1 mile north-east), Great Lever (1 mile west), Harper Green (1 mile south), Moses Gate (1 mile south-east) and Farnworth (1 mile south). Larger places within reach include Horwich (6 miles west), Westhoughton (5 miles west), Woolfold (5 miles north-east), Astley Bridge (3 miles north), Sharples (3 miles north) and Daisy Hill (5 miles south-west).
Local landmarks in Burnden
Around Burnden, we work in homes near Leverhulme Park, Churchills Public House and Mount St Joseph, among other places. Also close by are Bolton Library and Museum Services (1.3 miles north-west), St Michael's CofE Primary School (within half a mile south-east) and Church of St Michael With St Bartholomew (within half a mile south-east). The closest station to Burnden is Moses Gate station, roughly 0.7 miles south-east. Well-known places in the area include Bolton Market Place (1.3 miles north-west) and Bolton le Moors (1.3 miles north-west). For a walk, there is Nob End.
About our accreditations · Every repair comes with a one-year guarantee.
