Carmarthenshire · Wales
Bath Resealing for Burry Port homes
Our repair technicians come to Burry Port for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Black spots in the silicone
- Gaps in the seal
- Stained silicone
What bath resealing costs
We give every job a fixed price from photos. This is what makes a difference:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Whether old repairs or coatings need taking off
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
We price nearly every job from pictures. This is what to send:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
About our bath resealing in Burry Port
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. Our repair technicians work on baths, shower trays & enclosures and wet rooms, and people most often call us about black spots in the silicone and unsealed corners.
All our work comes with a one-year guarantee, wherever you are in Carmarthenshire.
- Where
- Burry Port (SA16)
- County
- Carmarthenshire
- Cover
- One year on every repair
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Burry Port
Other services in Burry Port
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What we cannot put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- A bath or tray that moves, until its support is fixed
- Gaps too big for silicone alone
- Tiles that move, until they’re refixed
Send us photos and we’ll tell you honestly.
Materials we repair
- Baths
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
Common questions in Burry Port
Do you cover Burry Port?
Yes. We work across the UK and come to Burry Port and the rest of Carmarthenshire. Send us pictures for a fixed quote, or call 0345 017 0787.
How do I get a price for bath resealing in Burry Port?
The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
When can I use the bath after resealing?
We will give you the curing time.
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first, so let us know about it.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
What happens once I’ve sent photos?
You will get a fixed quote back. You are under no obligation.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
When to call us in Burry Port
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
Get in touch if you’ve noticed any of these:
- Discoloured, yellow sealant
- Mould you can’t clean out
- Gaps by the taps
- Gaps in the seal
What your quote should include
- A fixed price, and whether VAT is included
- Whether the price covers travel
- How to look after the finish
- Whether they match the colour on site
Burry Port and the surrounding area
Burry Port (Welsh: Porth Tywyn) is about 4 miles west of Llanelli, in Carmarthenshire. Across the SA16 area, we carry out the work at your property. We cover all 195 towns and villages across Carmarthenshire, from the larger towns to small villages.
Every address in SA16 is within our area, from the main roads to the quietest streets. Whether you live on Station Road, Church Road and Sandfield Road or a nearby road, we can come to you. Burry Port is on the A484 and B4311, so it’s easy for us to reach. We also cover the places around Burry Port: Achddu (1 mile north), Furnace (1 mile west), Y Graig (1 mile north), Pembrey and Burry Port Town (1 mile south-west) and Pembrey (1 mile west). We also work in nearby towns such as Llanelli (4 miles east), Carmarthen (12 miles north), Llanelli Rural (4 miles east), Bigyn (4 miles east), Wern (4 miles east) and Ammanford (13 miles north-east). Burry Port is among the bigger towns we cover in Carmarthenshire.
Landmarks near Burry Port
Around Burry Port, we work in homes near Hope & Anchor pub, Ysgol Glan-Y-Mor School and Burry Port Community Primary School. There is a railway station in Burry Port itself: Pembrey & Burry Port station. Further afield, we also cover the area around Waun Twmpath Motte (1.6 miles north-east) and Parc Howard Museum (3.9 miles east). Not far away are Cwm Ivy Woods and Mynydd Pen-bre.
Materials and what they mean for the repair
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
Trays are sealed with weight on them, for the same reason.
Is resealing worth it?
Putting new silicone over old does not last. It soon peels, and traps mould underneath. A proper reseal removes the old first. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Burry Port clients choose us
- One-year guarantee on every repair
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
See our pricing.
How to care for the repair
To keep it looking its best:
- Do not stand toiletries on the seal
- Air the room after use
- Clean the sealant gently and regularly
- Reseal when black spots will not clean off
Avoid scraping the joints, and keep shampoo bottles off the joints.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
How the visit works
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for around two hours from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Let us know if it has been repaired before
- Open a window if you can
- Keep pets and children out of the room while we work
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
