Angus · Scotland
Bath Resealing for Carlogie homes
Bath resealing in Carlogie without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Stained silicone
- Damp near the bath
- Mould you can’t clean out
Is resealing worth it?
Putting new silicone over old does not last. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Carlogie customers choose us
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Usually one visit, start to finish
Take a look at our full price list.
Bath resealing in Carlogie without replacing anything
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Typical jobs include water getting behind the bath or tray and unsealed corners, in baths, wet rooms and shower trays & enclosures.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Carlogie (DD7)
- Region
- Angus
- Warranty
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath resealing in Carlogie?
In time, even good sealant discolours. Steam, soap and movement all take their toll.
Typical reasons for a call-out include:
- Missing sealant behind the taps
- Stained silicone
- Silicone coming away from the tiles
- Leaks at the edges
Before you book anyone
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- What preparation is included
Towns and villages near Carlogie
Other services in Carlogie
Carlogie: your questions answered
Do you seal over the old sealant?
Never over old. It’s removed, cleaned off and the joint dried first.
Which areas do you work in?
The whole UK, including all of Angus. Send your postcode with your pictures and we will confirm dates.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long does a reseal take?
Generally a couple of hours, then it needs to cure.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What affects the price in Carlogie
You’ll know the full cost before booking. We take into account:
- Whether we combine several jobs
- Unusual colours or finishes
- How easy the damage is to reach
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote without visiting.
What we cannot put right
A few problems are outside what a surface repair can do:
- Hidden water damage
- Gaps so wide they need filling or trims before sealing
- A flexing bath
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
About Carlogie
Carlogie is about 1 mile north of Carnoustie, in Angus. We visit homes and businesses in Carlogie, so there’s no workshop to go to. We cover all 40 towns and villages across Angus. You can also see our page for Edinburgh, about 44 miles away.
Jobs in DD7 are booked in the same way as anywhere else. From Isla Avenue, Carlogie Farm Road and Prosen Bank or anywhere nearby, a technician can come to you. Neighbouring places we cover include Clayholes (1 mile south-west), Panbride (1 mile east), Carnoustie (1 mile south), Hunter's Town (1 mile south-west) and West Haven (1 mile south-east). Further out, we also cover Arbroath (6 miles north-east), Forfar (11 miles north-west), Brechin (15 miles north), Letham (8 miles north) and Friockheim (9 miles north).
Landmarks near Carlogie
Locally, our jobs take us to homes close to Holyrood Episcopal Church and Carnoustie High School and the streets around them. The closest station to Carlogie is Carnoustie station, about 1 mile south-east. Further afield, we also cover the area around Panmure Castle (1.4 miles north-west) and Ashludie Hospital (4.3 miles south-west).
How the visit works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes about two hours for a bath, and we finish by cleaning up and talking you through the result.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Preparing for the visit
- Let us know about parking or access
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
About our accreditations · Every repair comes with a one-year guarantee.
