Blackburn with Darwen · England

Bath Resealing for Cherry Tree homes

Our repair technicians come to Cherry Tree for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.

  • Mould you can’t clean out
  • Unsealed corners
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Cherry Tree?

Cherry Tree questions

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Can you reseal over the old silicone?

No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.

How do I stop mould in sealant?

Damp is the cause. Ventilation and drying keep it clean longer.

Why does the silicone keep cracking?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

How much does bath resealing cost in Cherry Tree?

Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

About our bath resealing in Cherry Tree

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. Whether it’s unsealed corners and stained silicone, we can help, whatever the material.

All our work is covered by our one-year guarantee, wherever you are in Blackburn with Darwen.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Cherry Tree (BB2)
Region
Blackburn with Darwen
Warranty
One year on every repair
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Materials and what they mean for the repair

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

How the visit works

Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for about two hours for a bath from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Preparing for the visit

  • Let us know which floor the room is on
  • Keep pets and children out of the room while we work
  • Move bottles, mats and clutter away from the area

Get a quote

Email us a picture of the damage and a wider shot of the entire item, with your BB2 postcode, and we’ll come back with a fixed quote.

Send pictures for a quote

Advice

Is resealing worth it?

Putting new silicone over old doesn’t last. It soon peels, and traps mould underneath. We remove the old sealant completely. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • CHAS and Constructionline accredited
  • We’ll tell you if it’s not worth repairing
  • Same prices wherever you are
  • Dust sheets down, tidy finish

See our pricing.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Where we work around Cherry Tree

Cherry Tree is about 2 miles south-west of Blackburn, in Blackburn with Darwen. We visit homes and businesses in Cherry Tree and the surrounding area, so you don’t need to take anything anywhere. We cover all 42 towns and villages across Blackburn with Darwen. Our jobs stretch from Cherry Tree to Manchester (22 miles away).

Every address in BB2 is covered. From Tower Road, Green Lane and Willis Road or a nearby road, a technician can come to you. Cherry Tree sits on or near the A674 and A6062, which makes travel easy. We also cover the places around Cherry Tree: Feniscliffe (1 mile north), Mill Hill (1 mile north-east), Witton (1 mile north-east), Feniscowles (1 mile south-west) and Pleasington (1 mile west). Further out, we also cover Darwen (3 miles south-east), Bastwell (3 miles north-east), Bank Hey (3 miles north-east), Little Harwood (3 miles north-east), Rishton (5 miles north-east) and Shadsworth (3 miles east).

Local landmarks in Cherry Tree

In Cherry Tree, that means homes near Corporation Park, Livesey Saint Francis' Church of England School and St Wilfrid's Church of England Academy and the streets around them. Nearby too are St Francis (under half a mile north-east) and St Bede's Roman Catholic High School (less than half a mile south). Cherry Tree has its own railway station: Cherry Tree station. Nearby you will also find The Mall Blackburn (1.8 miles north-east) and Blackburn Royal Infirmary (1.2 miles east).

Map of Cherry Tree © OpenStreetMap contributors

Landlords, agents and businesses in Cherry Tree

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Landlords, letting agents and housing providers in Cherry Tree use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Aftercare tips

So the finish stays in good condition:

  • Use the extractor fan
  • Air the room after use
  • Dry the seal after bathing
  • Clean the sealant gently and regularly

Keep the room well ventilated, and dry the joints after bathing.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Honest limits

Honesty matters more than a booking, so here’s what a repair will not do:

  • Loose tiles, which need refixing first
  • Hidden water damage
  • Gaps too big for silicone alone

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Cherry Tree

  • Basins & vanity units
  • Baths
  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & sinks

Prices and what affects them

Prices are worked out job by job. What matters most is:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes
  • How easy the damage is to reach

Our prices are the same across the UK, so there’s no premium for Cherry Tree. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed quote

Before you send pictures, these tips help us give you a firm price:

  • Where you are, by postcode
  • A coin beside the damage so we can judge size
  • A photo taken from further back
  • A clear, close picture of the problem area

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job without visiting.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.