West Sussex · England
Bath Resealing for Chilgrove homes
Bath resealing across Chilgrove and nearby, done in a single visit in most cases.
- Damp near the bath
- Black spots in the silicone
- Silicone smeared on tiles
About our bath resealing in Chilgrove
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Our technicians work on baths, wet rooms and shower trays & enclosures, and common reasons people get in touch are an untidy old seal and old sealant that looks dirty.
Big or small, it’s backed by a one-year guarantee.
- Where
- Chilgrove (PO18)
- County
- West Sussex
- Guarantee
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. It normally takes a couple of hours.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
- Hollow or loose tiles
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Shower trays & enclosures
- Wet rooms
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
Towns and villages near Chilgrove
What else we do in Chilgrove
What bath resealing costs
There’s no charge for travel to Chilgrove. The price comes down to:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Access to the area
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Any details about the material
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job the same day in most cases.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
When to call us in Chilgrove
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
Typical reasons for a call-out include:
- Silicone smeared on tiles
- Sealant that is split or lifting
- Stained silicone
- Mould you cannot clean out
Before booking anyone
- Aftercare advice
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- What happens if they find more damage
Covering Chilgrove
Chilgrove is about 6 miles north of Chichester, in West Sussex. We travel to homes and businesses in Chilgrove and nearby villages, so nothing has to leave your home. We cover 371 places in West Sussex. We work right across the region, from Chilgrove to London (about 51 miles away).
Our visits in PO18 are booked in the same way as anywhere else. We also cover the places around Chilgrove: East Marden (2 miles west), Didling (3 miles north), Elsted (4 miles north), Compton (4 miles west) and Ingrams Green (4 miles north). Larger places within reach include Bognor Regis (10 miles south-east), Chichester (6 miles south), Selsey (13 miles south), Littlehampton (14 miles south-east), Emsworth (7 miles south-west) and Rustington (15 miles south-east).
Landmarks near Chilgrove
Other landmarks nearby include Chichester Centre (5.2 miles south) and Museum of Gardening (1.7 miles south-east). Green spaces nearby include Kingley Vale National Nature Reserve and Bow Hill.
Your questions about bath resealing in Chilgrove
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
How do I get a price for bath resealing in Chilgrove?
Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your PO18 postcode.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
My seal keeps tearing. Why?
Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
Different materials, different repairs
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Air the room after use
- Wipe the joints dry after use
- Use the extractor fan
- Keep bottles off the joints
Don’t scrape the sealant with anything sharp, and don’t stand bottles on the seal.
Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
About our accreditations · Every repair comes with a one-year guarantee.
