Gloucestershire · England

Bath & shower resealing (mastic) in Churcham, Gloucestershire

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Churcham. Free, fixed quotes from your pictures.

  • Damp near the bath
  • Gaps by the taps
  • Silicone smeared on tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Churcham?

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Bath resealing in Churcham without replacing anything

We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Common call-outs are for mould you can’t clean out and discoloured, yellow sealant, in baths, kitchen worktops & sinks and basins & vanity units.

Whatever the size of the job, you get the same one-year guarantee.

Location
Churcham (GL2)
Area hub
Gloucestershire
Warranty
12 months on all our work
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Our work in Churcham

Churcham is about 4 miles north-west of Quedgeley, in Gloucestershire. Anywhere in GL2, we come to you. We cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Churcham to Birmingham (about 46 miles away).

We work across the GL2 postcode area and the streets around it. Jobs here include addresses on Bulley Lane, Lake Lane and Church Lane. Neighbouring places we cover include Bulley (1 mile north), Oakle Street (1 mile south), Birdwood (1 mile west), Calcott's Green (2 miles south-east) and Tibberton (2 miles north). We also work in nearby towns such as Cheltenham (11 miles east), Gloucester (5 miles east), Stroud (10 miles south-east), Tewkesbury (12 miles north-east), St Paul's (12 miles east) and Lansdown (12 miles east).

Around Churcham

Typical jobs here are in homes near Churcham Primary School, The School of the Lion and Church of St Michael and the streets around them. Churcham’s nearest station is Gloucester station, roughly 4.6 miles east. A little further out are Gloucestershire Royal Infirmary (4.1 miles east) and Westgate Galleria (3.9 miles east). Not far away are May Hill and Highnam Woods.

Map of Churcham © OpenStreetMap contributors

Signs you need bath resealing in Churcham

Poor ventilation speeds things up: damp hangs around, and mould takes hold.

The things customers typically mention when they call include:

  • Old sealant that looks dirty
  • Silicone smeared on tiles
  • Black spots in the silicone
  • Sealant that is split or lifting

What to look for in a quote

  • How long the guarantee is and what it covers
  • If travel is included in the price
  • How the colour is matched
  • Whether a trained technician does the job

How to compare quotes

How to look after the repair

After the repair has cured, a few habits help it last:

  • Clean the sealant gently and regularly
  • Run the extractor fan during and after showers
  • Dry the seal after bathing
  • Let steam out after showers

Keep the room well ventilated, and wipe the joints after use.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.

Different materials, different repairs

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

What a repair cannot fix

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Rotten walls or floors behind the bath
  • Gaps so wide they need filling or trims before sealing
  • Movement in the bath or tray

If in doubt, send pictures and we’ll say what we think before booking.

Materials we repair

  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms
  • Basins & vanity units

Why reseal now?

Putting new silicone over old does not last. It soon peels, and traps mould underneath. We remove the old sealant completely. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Free fixed quotes from pictures
  • CHAS, Constructionline and SafeContractor accredited
  • One visit for most repairs
  • Nothing taken out or refitted

Read our pricing.

Questions from Churcham

Do you come to Churcham?

Yes. We cover the whole UK and come to Churcham. Send us photos for a fixed quote, or call 0345 017 0787.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.

Are there extra charges for Churcham?

There is no separate call-out charge. Your fixed quote includes everything.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Will there be a smell?

There can be some smell while we work. It fades as everything cures.

How do I stop mould in sealant?

Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

How long does resealing take?

Generally a couple of hours, plus curing time.

Prices and what affects them

We don’t charge extra for travel to Churcham. The price comes down to:

  • How hard the colour is to match
  • The material
  • How many areas need work
  • Whether we combine several jobs

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send photos for a quote

You can typically get a fixed price without us visiting. To make it quick:

  • Something in shot to show the size
  • The postcode, so we can plan the visit
  • Any details about the material
  • Natural light rather than flash

Upload a photo of the damage and a wider shot of the whole item, with your GL2 postcode, and we will come back with a fixed quote.

How the visit works

You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a couple of hours, and you can get on with other things while we are there.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Preparing for the visit

  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access
  • Have a window or extractor fan available

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.